Summit - Denver Instrument

Basic Weighing FunctionPreparation§ Switch on the balance: Press§ Tare the balance, if necessary:Press t$ If necessary, change the configurationsettings:See the chapter entitled“Configuration”$ If desired, load the factory settings:See the chapter entitled“Configuration”Additional Functions$ Switching off the balance:Press$ Balance in standby mode:the current time is displayedFeatures– Taring the balance– Printing weightsUsing Verified Balances as LegalMeasuring Instruments in the EU*:The type-approval certificate forverification applies only to non-automaticweighing instruments.For automatic operation with or withoutauxiliary measuring devices, youmust comply with the regulationsapplicable to the place of installation.§ Before using the balance as a legalmeasuring instrument, calibrateand adjust it at the place of useusing the built-in motorized calibrationweight; for details, see“Calibration/Adjustment” in thischapter.$ The temperature range (°C)indicated on the verification labelmust not be exceeded duringoperation.Example:BD ED 200K +10°C to +30°C* Including the Signatories ofthe Agreement on the EruopeanEconomic Area13