Product catalog - TURCK

FOUNDATION fieldbusBackplane for the DPC systemDPC-49-4RMBFOUNDATION fieldbusBackplane for the DPC systemDPC-49-4RMBHans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com1+ – SHost2 3+ – S+ – S4+ – SErrDiagnosticSegment 1ASegment 1BSegment 2ASegment 2BSegment 3ASegment 3BSegment 4ASegment 4BPwr A +–+Pwr B –Caseground+ – S1+ – S + – S2 3Field+ – S4ShieldThe DPC system (Diagnostic Power Conditioner)is a power supply system for the installationof FOUNDATION fieldbus H1segments. It provides extensive diagnosticoptions for monitoring FOUNDATIONfieldbus segments and thus supports plantwideasset management.A DPC system consists of one or more moduleracks, each with up to eight DPC-49-IPS1 power supply modules and one DPC-49-ADU resp. DPC-49-DU diagnostics module.Up to four H1 segments for each modulerack can be operated and monitoredredundantly in the FOUNDATION fieldbusnetwork. The diagnostic data of the H1segment can be transmitted via the HSEinterface module DPC-49-HSEFD/24VDCto the higher level asset management system(only in conjunction with the diagnosticsmodule DPC-49-ADU).The module rack consist of a backplaneand the actual rack system for the powersupply modules and the diagnostics module.The single components of the system areelectrically linked via the connection terminalsof the backplane. From electrical perspective,the backplane is to be consideredpassive.The power can be supplied via two 2-polescrew connectors. The connection of thehost system is established per segment viaremovable 3-pole screw terminals.For the connection of the H1 segments tothe fieldbus side, each segment is individuallyconnected with a removable 3-polescrew terminal.The shielding is achieved via insulatedshield bus or via the 3-pole screw terminal,which is internally connected with the M5threaded bolt for equipotential bonding. Afurther M5 threaded bolt for equipontentialbonding is simply connected to the housing.For simple diagnostics processing, a connectionis provided to the relay alarm contactof the diagnostics module.●●●●Module rack for up to 8 power supplymodules and 1 diagnostics modulefor the mounting of up to 4 H1segments.Redundant power supplyRemovable terminal blocks withscrew connectionsRJ45 connector for HSE fieldbusdiagnostics10 /0309 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0)208 4952-0 • Fax +49 (0)208 4952-264 • more@turck.com • www.turck.com