Base Year

More documents

Recommendations

Info

HS CODEDESCRIPTION OF GOODSINDICATIVE TARIFF REDUCTION SCHEDULE2005(BaseYear)2006 2007 2008 Category7208.26.90 ---Other :7208.26.90.10 ----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 SLof a width up to 2,080 mm, with thedecorative styled surface (checker) orpickled or not7208.26.90.90 ----Other 5 5 5 5 SL7208.27 --Of a thickness of less than 3 mm :---Of a thickness of less than 1.5 mm :7208.27.11 ----Steel plates and sheets containing byweight 0.6% or more of carbon :7208.27.11.10 -----Of a thickness more than 2 mm, maximum 7.5 7.5 7.5 7.5 SLtensile strength of 550 Mpa, of a widthup to 2,080 mm, with the decorative styledsurface (checker) or pickled or not7208.27.11.90 -----Other 5 5 5 5 SL7208.27.19 ----Other :7208.27.19.10 -----Of a thickness more than 2 mm, maximum 7.5 7.5 7.5 7.5 SLtensile strength of 550 Mpa, of a widthup to 2,080 mm, with the decorative styledsurface (checker) or pickled or not7208.27.19.90 -----Other 5 5 5 5 SL---Other :7208.27.91 ----Steel plates and sheets containing byweight 0.6% or more of carbon :7208.27.91.10 -----Of a thickness more than 2 mm, maximum 7.5 7.5 7.5 7.5 SLtensile strength of 550 Mpa, of a widthup to 2,080 mm, with the decorative styledsurface (checker) or pickled or not7208.27.91.90 -----Other 5 5 5 5 SL7208.27.99 ----Other :7208.27.99.10 -----Of a thickness more than 2 mm, maximum 7.5 7.5 7.5 7.5 SLtensile strength of 550 Mpa, of a widthup to 2,080 mm, with the decorative styledsurface (checker) or pickled or not7208.27.99.90 -----Other 5 5 5 5 SL-Other, in coils, not further worked than hotrolled:7208.36.00 --Of a thickness exceeding 10 mm :7208.36.00.10 ---Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 Eof a width up to 2,080 mm, with thedecorative styled surface (checker) orpickled or not7208.36.00.90 ---Other 5 5 5 5 E7208.37 --Of a thickness of 4.75 mm or more but notexceeding 10 mm :7208.37.10 ---Steel plates and sheets containing byweight less than 0.6% of carbon :7208.37.10.10 ----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 SLof a width up to 2,080 mm, with thedecorative styled surface (checker) orpickled or not7208.37.10.90 ----Other 5 5 5 5 SL7208.37.90 ----Other :7208.37.90.10 -----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 SLof a width up to 2,080 mm, with thedecorative styled surface (checker) orpickled or not198 / 387
HS CODEDESCRIPTION OF GOODSINDICATIVE TARIFF REDUCTION SCHEDULE2005(BaseYear)2006 2007 2008 Category7208.37.90.90 -----Other 5 5 5 5 SL7208.38 --Of a thickness of 3 mm or more but lessthan 4.75 mm :7208.38.10 ---Steel plates and sheets containing byweight less than 0.6% of carbon :7208.38.10.10 ----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 SLof a width up to 2,080 mm, with thedecorative styled surface (checker) orpickled or not7208.38.10.90 ----Other 5 5 5 5 SL7208.38.90 ---Other :7208.38.90.10 ----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 SLof a width up to 2,080 mm, with thedecorative styled surface (checker) orpickled or not7208.38.90.90 ----Other 5 5 5 5 SL7208.39 --Of a thickness of less than 3 mm :---Of a thickness of less than 1.5 mm :7208.39.11.00 ----Steel plates and sheets containing by 5 5 5 5 SLweight 0.6% or more of carbon :7208.39.19.00 ----Other : 5 5 5 5 SL7208.39.90 ---Other :7208.39.90.10 ----Of a thickness more than 2 mm, maximum 7.5 7.5 7.5 7.5 SLtensile strength of 550 Mpa, of a widthup to 2,080 mm, with the decorative styledsurface (checker) or pickled or not7208.39.90.90 ----Other 5 5 5 5 SL7208.40 -Not in coils, not further worked than hotrolled,with patterns in relief :7208.40.00.10 --Of a thickness more than 2 mm, maximum 7.5 7.5 7.5 7.5 Btensile strength of 550 Mpa, of a widthup to 3,300 mm, containing by weight morethan 0,16 % but less than 0,6% of carbon,with the decorative styled surface (checker)or pickled or not7208.40.00.90 --Other 5 5 5 5 B-Other, not in coils, not further worked thanhot-rolled :7208.51.00 --Of a thickness exceeding 10 mm :7208.51.00.10 --Of a maximum tensile strength of 550 Mpa, 7.5 5 5 3 NTof a width up to 3,300 mm, containing byweight more than 0,16 % but less than 0,6%of carbon, with the decorative styledsurface (checker) or pickled or not7208.51.00.90 ---Other 5 5 5 5 B7208.52.00 --Of a thickness of 4.75 mm or more but notexceeding 10 mm :7208.52.00.10 --Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 Eof a width up to 3,300 mm, containing byweight more than 0,16 % but less than 0,6%of carbon, with the decorative styledsurface (checker) or pickled or not7208.52.00.90 ---Other 5 5 5 5 E7208.53.00 --Of a thickness of 3 mm or more but less than4.75 mm :7208.53.00.10 --Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 Eof a width up to 3,300 mm, containing by199 / 387
Page 2 and 3:
INDICATIVE TARIFF REDUCTION SCHEDUL
Page 4 and 5:
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
HS CODEDESCRIPTION OF GOODSINDICATI
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
HS CODEDESCRIPTION OF GOODS1901.90
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
HS CODEDESCRIPTION OF GOODSof a kin
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
HS CODEDESCRIPTION OF GOODSchemical
Page 59 and 60:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
HS CODEDESCRIPTION OF GOODSkind use
Page 88 and 89:
HS CODEDESCRIPTION OF GOODSup for r
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
HS CODEDESCRIPTION OF GOODSfor use
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
HS CODEDESCRIPTION OF GOODScertific
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149: INDICATIVE TARIFF REDUCTION SCHEDUL
Page 170 and 171: HS CODEDESCRIPTION OF GOODS-Trouser
Page 172 and 173: HS CODEDESCRIPTION OF GOODSINDICATI
Page 178 and 179: HS CODEDESCRIPTION OF GOODSup into
Page 180 and 181: HS CODEnot lined or trimmedDESCRIPT
Page 188 and 189: HS CODEDESCRIPTION OF GOODS(includi
Page 200 and 201: HS CODEDESCRIPTION OF GOODSweight m
Page 202 and 203: HS CODEDESCRIPTION OF GOODSterne-pl
Page 224 and 225: HS CODEDESCRIPTION OF GOODSnot less
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
HS CODEDESCRIPTION OF GOODScontaine
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
HS CODEDESCRIPTION OF GOODSlasercut
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
HS CODEDESCRIPTION OF GOODSabove bu
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
HS CODEDESCRIPTION OF GOODSnot for
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
show all

Base Year

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?