Base Year

HS CODEDESCRIPTION OF GOODSINDICATIVE TARIFF REDUCTION SCHEDULE2005(BaseYear)2006 2007 2008 Category7208.37.90.90 -----Other 5 5 5 5 SL7208.38 --Of a thickness of 3 mm or more but lessthan 4.75 mm :7208.38.10 ---Steel plates and sheets containing byweight less than 0.6% of carbon :7208.38.10.10 ----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 SLof a width up to 2,080 mm, with thedecorative styled surface (checker) orpickled or not7208.38.10.90 ----Other 5 5 5 5 SL7208.38.90 ---Other :7208.38.90.10 ----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 SLof a width up to 2,080 mm, with thedecorative styled surface (checker) orpickled or not7208.38.90.90 ----Other 5 5 5 5 SL7208.39 --Of a thickness of less than 3 mm :---Of a thickness of less than 1.5 mm :7208.39.11.00 ----Steel plates and sheets containing by 5 5 5 5 SLweight 0.6% or more of carbon :7208.39.19.00 ----Other : 5 5 5 5 SL7208.39.90 ---Other :7208.39.90.10 ----Of a thickness more than 2 mm, maximum 7.5 7.5 7.5 7.5 SLtensile strength of 550 Mpa, of a widthup to 2,080 mm, with the decorative styledsurface (checker) or pickled or not7208.39.90.90 ----Other 5 5 5 5 SL7208.40 -Not in coils, not further worked than hotrolled,with patterns in relief :7208.40.00.10 --Of a thickness more than 2 mm, maximum 7.5 7.5 7.5 7.5 Btensile strength of 550 Mpa, of a widthup to 3,300 mm, containing by weight morethan 0,16 % but less than 0,6% of carbon,with the decorative styled surface (checker)or pickled or not7208.40.00.90 --Other 5 5 5 5 B-Other, not in coils, not further worked thanhot-rolled :7208.51.00 --Of a thickness exceeding 10 mm :7208.51.00.10 --Of a maximum tensile strength of 550 Mpa, 7.5 5 5 3 NTof a width up to 3,300 mm, containing byweight more than 0,16 % but less than 0,6%of carbon, with the decorative styledsurface (checker) or pickled or not7208.51.00.90 ---Other 5 5 5 5 B7208.52.00 --Of a thickness of 4.75 mm or more but notexceeding 10 mm :7208.52.00.10 --Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 Eof a width up to 3,300 mm, containing byweight more than 0,16 % but less than 0,6%of carbon, with the decorative styledsurface (checker) or pickled or not7208.52.00.90 ---Other 5 5 5 5 E7208.53.00 --Of a thickness of 3 mm or more but less than4.75 mm :7208.53.00.10 --Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 Eof a width up to 3,300 mm, containing by199 / 387