Base Year

HS CODEDESCRIPTION OF GOODSINDICATIVE TARIFF REDUCTION SCHEDULE2005(BaseYear)2006 2007 2008 Category7210.90.30.00 --Electrolytically plated or coated with zinc, 15 15 15 15 Eof thickness not exceeding 1.2 mm7210.90.40.00 --Electrolytically plated or coated with zinc, 15 15 15 15 Eof thickness exceeding 1.2 mm7210.90.50.00 --Otherwise plated or coated with zinc or 15 15 15 15 Ealuminium, of thickness exceeding 1.2 mm7210.90.60.00 --Plated or coated with zinc or aluminium, of 15 15 15 15 Ea thickness not exceeding 1.2 mm7210.90.70.00 --Plated or coated with other metals, of 15 15 15 15 Ea thickness not exceeding 1.2 mm7210.90.90.00 --Other 15 15 15 15 E72.11 Flat-rolled products of iron or non-alloysteel, of a width of less than 600 mm, notclad, plated or coated.-Not further worked than hot-rolled :7211.13 --Rolled on four faces or in a closed boxpass, of a width exceeding 150 mm and athickness of not less than 4 mm, not incoils and without patterns in relief :---Containing by weight 0.6% or more ofcarbon :7211.13.11.00 ----Universal plates 5 5 5 5 SL7211.13.12.00 ----Hoop and strip 5 5 5 5 SL7211.13.19.00 ----Other 5 5 5 5 SL---Other :7211.13.91 ----Universal plates :7211.13.91.10 -----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 Bcontaining by weight less than 0.6 %of carbon, with the decorative styledsurface (checker) or pickled or not7211.13.91.90 -----Other 5 5 5 5 SL7211.13.92 ----Corrugated :7211.13.92.10 -----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 Bcontaining by weight less than 0.6 %of carbon, with the decorative styledsurface (checker) or pickled or not7211.13.92.90 -----Other 5 5 5 5 SL7211.13.93.00 ----Hoop and strip 7.5 7.5 7.5 7.5 B7211.13.99 ----Other :7211.13.99.10 -----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 Bcontaining by weight less than 0.6 %of carbon, with the decorative styledsurface (checker) or pickled or not7211.13.99.90 -----Other 7.5 7.5 7.5 7.5 B7211.14 --Other, of a thickness of 4.75 mm or more :---Containing by weight 0.6% or more ofcarbon:7211.14.11 ----Universal plates :7211.14.11.10 -----Of a maximum tensile strength of 550 Mpa, 7.5 7.5 7.5 7.5 Bwith the decorative styled surface(checker) or pickled or not203 / 387