Base Year

INDICATIVE TARIFF REDUCTION SCHEDULEHS CODEDESCRIPTION OF GOODS2005(Base 2006 2007 2008 CategoryYear)in coils :7225.30.10.00 --Of a thickness of less than 1.5 mm 0 0 0 0 NT--Of a thickness of 1.5 mm or more but notexceeding 125 mm, with patterns in reliefderived from rolling :7225.30.21.00 ---Of a thickness of less than 3 mm 0 0 0 0 NT7225.30.29.00 ---Other 0 0 0 0 NT--Other :7225.30.91.00 ---Of a thickness of less than 3 mm 0 0 0 0 NT7225.30.99.00 ---Other 0 0 0 0 NT7225.40.00.00 -Other, not further worked than hot-rolled, 0 0 0 0 NTnot in coils7225.50.00.00 -Other, not further worked than cold-rolled 0 0 0 0 NT(cold-reduced)-Other :7225.91.00.00 --Electrolytically plated or coated with zinc 0 0 0 0 NT7225.92.00.00 --Otherwise plated or coated with zinc 0 0 0 0 NT7225.99.00.00 --Other 0 0 0 0 NT72.26 Flat-rolled products of other alloy steel, ofa width of less than 600 mm.-Of silicon-electrical steel :7226.11 --Grain-oriented :7226.11.10.00 ---Hoop and strip 0 0 0 0 NT7226.11.90.00 ---Other 0 0 0 0 NT7226.19 --Other :7226.19.10.00 ---Hoop and strip 0 0 0 0 NT7226.19.90.00 ---Other 0 0 0 0 NT7226.20 -Of high speed steel :7226.20.10.00 --Hoop and strip 0 0 0 0 NT7226.20.90.00 --Other 0 0 0 0 NT-Other :7226.91 --Not further worked than hot-rolled :7226.91.10.00 ---Hoop and strip 5 5 5 5 NT7226.91.90.00 ---Other 5 5 5 5 NT7226.92 --Not further worked than cold-rolled (coldreduced):7226.92.10.00 ---Hoop and strip 5 5 5 5 NT7226.92.90.00 ---Other 5 5 5 5 NT7226.93 --Electrolytically plated or coated with zinc:7226.93.10.00 ---Hoop and strip 5 5 5 5 NT7226.93.90.00 ---Other 5 5 5 5 NT7226.94 --Otherwise plated or coated with zinc :7226.94.10.00 ---Hoop and strip 5 5 5 5 NT7226.94.90.00 ---Other 5 5 5 5 NT7226.99 --Other :7226.99.10.00 ---Hoop and strip 5 5 5 5 NT7226.99.90.00 ---Other 5 5 5 5 NT72.27 Bars and rods, hot-rolled, in irregularlywound coils, of other alloy steel.7227.10.00.00 -Of high speed steel 5 5 5 5 NT7227.20.00.00 -Of silico-manganese steel 5 5 5 5 NT7227.90.00.00 -Other 5 5 5 5 NT72.28 Other bars and rods of other alloy steel;angles, shapes and sections, of other alloysteel; hollow drill bars and rods, of alloyor non-alloy steel.7228.10 -Bars and rods, of high speed steel :7228.10.10.00 --Of a cross-sectional dimension not exceeding 0 0 0 0 NT13 mm, cold-formed216 / 387