EIB-Interface 500 I/510 I - Somfy

More documents

Recommendations

Info

EIB-Interface 500 I/510 IInstructions for UseNo. Name Function Description6 move command UP / DOWN A „0“ message commands the drive to move to theupper final position, a „1“ message to the lower finalposition.7 STOP command STOP A message to this object causes the drive to stop.8 disable move command YES / NO If the window parameter „window contact(external/local)“ is set to „external“, all Motor movementscan be stopped through this object. A „1“ commandsthe Motor to automatically move to the disabledposition (upper or lower final position, STOP or no movecommand). Further drive commands are ignored. A „0“re-enables the Motor system.9 safety priority command A „1“ generates a move command to the programmablesafety position (upper or lower final position). The Motorsystem is deactivated until a „0“ re-enables the system.10 move roller shutter move 0-100% The roller shutter can be moved to any position withposition a 1 byte message (0% - 100%).EIB Interface 510 I Parameter Description(Factory settings are in italics)Parameter Settings Description❐ Safetysafety position upper final position The drive moves to the upper final position.lower final position The drive moves to the lower final position.STOPThe drive stops.no move command The drive moves up or down when this command isissued. Any further commands are blocked.receive safety signal static The drive moves to the programmed safety position if anon-cyclic safety message is received.cyclicThe drive moves to the programmed safety position if acyclic safety message is received.safety monitoring cycle 14 Überwachungszeitraum zum Empfang eines zyklischenin 5 seconds [1..63]Sicherheitstelegrammes. Die Überwachungszeit mußgrößer eingestellt werden, als die Zykluszeit des sendendenTeilnehmers.14© by SOMFY Rottenburg
EIB-Interface 500 I/510 IInstructions for UseParameter Setting Description❐ Window contactwindow contact extern Drive is disabled with a message to object no. 8. Thelocally connected window contact disables the drive.localOpening the contact disables the drive.window contact NC contact Closing the contact disables the drive.NO contactDurch Schließen des Kontaktes wird der Antriebgesperrt.window contact: send value YES The actual window contact status is indicatedthrough object no. 3NOThe actual window contact status is notindicated.blocking position upper final position The drive moves to the upper final position.lower final position The drive moves to the lower final position.STOPThe drive stops.no move command The drive moves up or down when this commandis issued. Any further commands areblocked.❐ Roller shuttersend roller shutter position YES The actual roller shutter position is transmitted(0% - 100%).NOThe roller shutter position is not transmitted.send periodically YES The updated roller shutter position is transmittedevery second.NOThe roller shutter position is transmitted afterdrive has come to a complete stop.❐ Sunshade positionalarm YES Alarm signal is issued if a upward/downwardmovement obstacle is detected.NONo obstacle alarm signal is issued.15© by SOMFY Rottenburg
Page 1: SOMFY Motor ILTEIB Interface 500 I
Page 4 and 5: SOMFY Motor ILTInstructions for Use
Page 6: SOMFY Motor ILTInstructions for Use
Page 9 and 10: EIB-Interface 500 I/510 IInstructio
Page 11 and 12: EIB-Interface 500 I/510 IInstructio
Page 13: EIB-Interface 500 I/510 IInstructio

EIB-Interface 500 I/510 I - Somfy

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?