Configuration and Access of FTP Server - TP-Link

More documents

Recommendations

Info

Application Guide6. Double-click a file and it will be downloaded automatically.Figure 4-7 Note:When you connect to a site, your My Documents folder is the default local folder to save yourdownloaded files, and the default remote folder is the folder specified when you configured the site.You can specify a different local folder and/or remote folder to appear in the Local and Remotepanels when you log in to a site.4.2 LAN Access1. Go to Start->Run, input cmd as shown below and then click OK or press Enter key.Figure 4-8- 21 -
Application Guide2. You will see the interface as below.Figure 4-93. Follow the cursor, input ipconfig and press Enter key. Write down the IP address of DefaultGateway as shown in Figure 4-10. (Here is 192.168.0.1).Figure 4-10- 22 -
Page 1: Configuration and Access of FTP Ser
Page 5 and 6: Application GuideChapter 2. Configu
Page 7 and 8: Application Guide10. Select the Sha
Page 9 and 10: Application GuideChapter 3. Access
Page 11 and 12: Application Guide4. You will see th
Page 13 and 14: Application Guide3.2 LAN Access1. G
Page 15 and 16: Application GuideFigure 3-135. Now
Page 17 and 18: Application GuideFigure 3-17 Note:W
Page 19 and 20: Application Guide2. Go to File->New
Page 21: 4. Now you can see the folder TP-LI
Page 25 and 26: Application Guide6. Set the dialog
Page 27: Application Guide9. Double-click a

Configuration and Access of FTP Server - TP-Link

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?