Model 777-KW/HP - SymCom

Model PC-105The PC-105is a five-channel pump controller designed to handle multiple pumpapplications.Alternatively, it can operate as a five-channel switch.The PC-105s control functions support all of the popular industry-standardmulti-pump configurations.It can indicate low, high and out-of-sequence alarms and use alternatingand non-alternating pump control.The non-alternating pump canbe used as a jockey pump or emergency pump.Using the built-in DIP switches, individual pumps can be disables whentaken out of service for repair or maintenance.Part No. PC-105Features• Low, high and out-of-sequence alarms• Variable time delay / lag pump delay from 2-255 seconds• Separate pump stops• Duplex, triplex or quadplex pump modes• Pump-up or pump-down functions• External silence, reset and alternation configuration• Five-channel relay configuration• DIN rail or surface mountableSpecificationsSupply Voltage • • • • • • • • • • • • 120VACFrequency • • • • • • • • • • • • • • • • 50*/60HzRelay Output RatingGeneral Purpose• • • • • • • • • • • • • 7A @ 240VACPilot Duty • • • • • • • • • • • • • • • • • 480VA @ 240VAC, B300Operating Temperature • • • • • • -20° to 55°CWeight • • • • • • • • • • • • • • • • • • 1.2 lbs.Power Consumption • • • • • • • • 4 Watts (max.)Wire range • • • • • • • • • • • • • • • 12 to 20 AWGRecommended Terminal Torque • 6 in.-lbs. (max.)Pump In-rush delay • • • • • • • • • 2 secondsStandards PassedElectrostatic Discharge (ESD) • • IEC 61000-4-2,Level 3,6kV contact,8kV air.Radio Frequency Immunity (RFI) • IEC 61000-4-2, Level 3, 10V/mFast Transients • • • • • • • • • • • • IEC 61000-4-4, Level 3, 4kV input power• • • • • • • • • • • • • • • • • • • • • • • 2kV Inputs/OutputsSafety Mark • • • • • • • • • • • • UL 508 (File #E68520)*Note: 50Hz will increase all delay timers by 20%www.symcom.com • tel: 605-348-5580 800-843-8848 • fax: 605-348-568545