IEM - Wear Products - Anchor Danly

www.danly.comNW Series Self-LubricatingWearstrips – MetricProduct FeaturesThe NW Series of wearstrip fully conforms to the Chryslerdie standards. They are manufactured in self-lubricating aluminumbronzematerial and are available in 10, 12 and 15mm thicknessesand in 150 and 300mm lengths. They are supplied with mountingholes. For ease of identifi cation, all products are marked withthe part number.NW10-50-150GMATERIALS: Aluminum bronze material with oil impregnatedgraphite plugs. The plugs cover 25-30% of thewear surface and are arranged to generateoptimal coverage at any engagement directionof the wearstrip.PATTERN APATTERN BPATTERN CTOLERANCES: Thickness Mounting hole locations Unless otherwise noted± 0.025 mm± 0.13 mm± 0.25 mmMOUNTING SCREWS: M6 S.H.C.S. recommended for 10mm thick strips M8 S.H.C.S. recommended for 12mm thick strips M10 S.H.C.S. recommended for 15mm thick stripsT—O—Width Length Thick Chrysler Mounting Hole Pattern & LocationW L T Code Hole A B C D E F G H(mm) (mm) (mm) Part Number Number Pttn. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)50 150 10 NW10-50-150G 19-296-1203 A 25 - 25 75 125 - - -75 10 NW10-75-150G 19-296-1205 B 15 60 25 125 - - - -50 12 NW12-50-150G 19-296-1223 A 25 - 25 75 125 - - -1502575 12 NW12-75-150G 19-296-1225 B 15 60 25 125 - - - -50 15 NW15-50-150G 19-296-1253 A 25 - 25 75 125 - - -75 15 NW15-75-150G 19-296-1255 B 15 60 25 125 - - - -50 300 10 NW10-50-300G 19-296-1403 A 25 - 25 75 125 175 225 27575 10 NW10-75-300G 19-296-1405 C 15 60 2550 12 NW12-50-300G 19-296-1423 A 25 - 257530012 NW12-75-300G 19-296-1425 C 15 60252575 125 175 225 27550 15 NW15-50-300G 19-296-1453 A 25 - 2575 15 NW15-75-300G 19-296-1455 C 15 60 2520