IEM - Wear Products - Anchor Danly

Self-LubricatingU & V Blocks – Inchwww.danly.comProduct FeaturesThese U and V Blocks are manufactured to inch dimensions.The V Block is manufactured from hardened steel and the Ublock is self-lubricating aluminum bronze with oil-impregnatedgraphite plugs. The blocks are provided with 5/8" dowel holesand are drilled and counterbored to accommodate 5/8" S.H.C.S.for mounting.MATERIALS:Q39UY48G & Q39VS48FIGURE AAluminumBronzeU-Block V Blocks are manufacturedfrom high quality carburizedsteel. They are precisionground and hardened toRc56-62. U Blocks are manufacturedfrom aluminum bronzematerial with oil-impregnatedgraphite plugs.FIGURE BSteelV-BlockTOLERANCES: Unless otherwise noted± 0.010 in.FIGURE CAssemblyMOUNTING SCREWS:5/8" S.H.C.S. recommendedfor mounting. Plate has21/32" drill through 1"counterbore.U Block V Block Length Mounting Mounting Hole LocationsPart Number Part Number L (in) Hole Qty. A (in) B (in) C (in) D (in) E (in)Q39UY48G Q39VS48 6.00 2 0.75 1.75 – 4.25 5.25Q39UY64G Q39VS64 8.00 2 1.00 2.00 – 6.00 7.00Q39UY80G Q39VS80 10.00 3 1.00 2.00 5.00 8.00 9.0031