IEM - Wear Products - Anchor Danly

www.danly.comPad Retainers –Locking Inch, Standard Mount with FlatsProduct FeaturesPad retainers are manufactured from 1144 steel andhardened to 28-34 Rockwell C-scale. They are machined toprecise tolerances in order to retain the pad and assureparallelism during use. The NP Series is also available, byspecial order, that offers three prongs as opposed to knurl.125-250FDiam. Diam. Length± .005PARTNO. D1 (in) D2 (in) L1 (in) L2 (in) L3 (in) L4 (in) S1 (in) S2 (in)100-100F 1.00 1.00100-125F 1.25 1.25100-150F 1.50 1.50100-175F 1.75 1.75100-200F 2.00 2.00100-225F 1.00 .75 2.25 1.00 .38 2.25 5/8 –- 18 5/16 –- 18100-250F 2.50 2.50100-275F 2.75 2.75100-300F 3.00 3.00100-325F 3.25 3.25100-350F 3.50 3.50106-100F 1.00 1.00106-125F 1.25 1.25106-150F 1.50 1.50106-175F 1.75 1.75106-200F 2.00 2.00106-225F 1.06 .81 2.25 1.00 .375 2.25 5/8 –- 18 5/16 – 18106-250F 2.50 2.50106-275F 2.75 2.75106-300F 3.00 3.00106-325F 3.25 3.25106-350F 3.50 3.50125-100F 1.00 1.00125-125F 1.25 1.25125-150F 1.50 1.50125-175F 1.75 1.75125-200F 2.00 2.00125-225F 2.25 2.25125-250F 2.50 2.50125-275F 2.75 2.75125-300F 1.25 1.00 3.00 1.12 .50 3.00 3/4 –- 16 3/8 –- 16125-325F 3.25 3.25125-350F 3.50 3.50125-375F 3.75 3.75125-400F 4.00 4.00125-450F 4.50 4.50125-500F 5.00 5.00125-550F 5.50 5.50125-600F 6.00 6.00162-100F 1.00 1.25162-125F 1.25 1.50162-150F 1.50 1.75162-175F 1.75 2.00162-200F 2.00 2.25162-225F1.62 1.252.251.12 .502.50162-250F 2.50 2.757/8 – 14 1/2 – 13162-275F 2.75 3.00162-300F 3.00 3.25162-325F 3.25 3.50162-350F 3.50 3.75162-375F 3.75 4.0058