IEM - Wear Products - Anchor Danly

Self-LubricatingGib Assemblies – Inchwww.danly.comProduct FeaturesThe gib assembly includes four components: two L-gibs,a base plate, and an optional T-slide. The L-gibs are providedwith screw holes and are spot drilled for dowels. Also, the baseplate includes thru holes to allow for easy assembly and fi t intoa pre-machined pocket. The gib assembly is a proven performerin a wide variety of applications, including lifter slides in molds.2GA16GTNOTES: See pages 22-24 for moredetailed specifi cations on L-Gibs,Base plates and T-Slides.Gib Gib Length Width Mounting Hole LocationsAssembly Assembly L W A B C1 D E HW/ T-Slide W/OUT T-Slide (in) (in) (in) (in) (in) (in) (in) (in)Part Number Part Number2GA16GTS 2GA16GT 2.002GA24GTS 2GA24GT 3.00 2.62 1.13 1.12 0.312 1.12 1.50 0.75 1.632GA32GTS 2GA32GT 4.003GA24GTS 3GA24GT 3.00 3.12 1.12 .575 1.12 1.62 .75 1.623GA32GTS 3GA32GT 4.00 3.12 1.12 0.575 0.12 1.62 0.75 1.623GA40GTS 3GA40GT 5.004GA24GTS 4GA24GT 3.00 4.12 1.25 .500 1.61 2.38 .88 1.754GA32GTS 4GA32GT 4.004GA40GTS 4GA40GT 5.004.12 1.25 0.500 1.61 2.38 0.88 1.754GA48GTS 4GA48GT 6.006GA32GTS 6GA32GT 4.00 4.62 1.63 .750 1.62 2.62 1.25 2.136GA40GTS 6GA40GT 5.00 4.62 1.63 0.750 1.62 2.62 1.25 2.136GA48GTS 6GA48GT 6.0021