IEM - Wear Products - Anchor Danly

NAAMS Series W01, W02 & W03Standard & Self-Lubricating Wear Plates – Metricwww.danly.comMounting Hole Pattern & LocationNAAMS Width LengthCode # W L Hole A B C D E F G(Y)* (mm) (mm) Qty. Pattern (mm) (mm) (mm) (mm) (mm) (mm) (mm)W 035010 50 100 2 A 25 – 25 30 – – 60W 035015 50150 2 A 25 – 2530 – – 110W 035020 50 200 2 A 25 – 25 40 – – 160W 038010 80 100 2 A 20 – 60 30 – – 60W 038015 80 150 2 A 20 – 60 30 – – 110W 038020 80200 2 A 20 – 6040 – – 160W 038025 80 250 2 A 20 – 60 40 – – 210W 038031 80 315 3 B 20 40 60 40 – 250 275W 031025 100 50 2 D 22 – 78 – 14 27 –W 031031 100 80 2 D 22 – 78 – 30 50 –W031050 100 100 2 A 22 – 78 30 – – 60W 031080 100150 2 A 22 – 7830 – – 110W 031010 100 200 3 B 22 50 78 40 – 135 160W 031015 100 250 3 B 22 50 78 40 – 185 210W 031020 100 315 3 B 22 50 78 40 – 250 275W 031231 125 80 2 D 25 – 100 – 30 50 –W 031280 125 100 2 A 25 – 100 30 – – 60W 031210 125 150 2 A 25 – 100 30 – – 11012525100W 031215 125 200 3 B 25 62 100 40 – 135 160W 031220 125 250 3 B 25 62 100 40 – 185 210W 031225 125 315 4 C 25 – 100 40 65 250 275W 031610 160 100 2 A 30 – 130 30 – – 60W 031615 160 150 2 A 30 – 130 30 – – 110W 031620 160200 3 B 30 80 13040 – 135 160W 031625 160 250 4 C 30 – 130 40 65 185 210W 031631 160 315 4 C 30 – 130 40 65 250 275MATERIALS: Steel wear plates are manufacturedfrom high quality carburized steel.They are precision ground andhardened to Rc 56-60 (1.2 mm to1.5 mm deep). They are availablewith or without graphite plugs. Bronze wear plates are manufacturedfrom aluminum bronze material withoil impregnated graphite plugs. When ordered with graphite plugs,the plugs cover 25-30% of the wearsurface and are arranged to generateoptimal coverage at any engagementdirection of the wear plate.TOLERANCES: Thickness Mounting holelocations Flatness Unless otherwisenotedMOUNTING SCREWS:± 0.025 mm± 0.25 mm± 0.012 mm± 0.25 mmM12 S.H.C.S. recommended. Platehas 13.5mm through hole with20mm counterbore 13mm deep.5