IEM - Wear Products - Anchor Danly

Self-LubricatingCenter Key & Guide – Metricwww.danly.comProduct FeaturesThe Center Key and Center Key Guide are available in 200and 300mm lengths and fully meet the NAAMS standard. Theycome standard with M12 dowel holes for location and are drilledto accommodate M12 S.H.C.S. for mounting.FIGURE ACenter Key GuideFIGURE BCenter KeyMATERIALS:4044GUIDE200 & 4044KEY200G Center Key Guide ismanufactured from high qualitycarburized steel. The wearsurfaces are precision groundand hardened to Rc56-62. Center Key is manufacturedfrom high quality carburizedsteel with oil-impregnatedgraphite plugs covering 20-30%of the wear surface. The wearsurface is precision ground andhardened to Rc56-62. Theproduct is also available as aspecial in aluminum bronzematerial.TOLERANCES: Mounting hole locations± 0.25 mm Dowel hole locations± 0.10 mmMOUNTING SCREWS:M12 S.H.C.S. are recommendedfor mounting.Part Steel Bronze Length Mounting A B C FigureNumber NAAMS Code NAAMS Code L (mm) Hole Qty. (mm) (mm) (mm)4044GUIDE200 G419020 N/A 200 2 – 135 160 A4044GUIDE300 G419030 N/A 300 3 150 235 260 A4044KEY200G G424020 – 200 2 – 135 160 B4044KEY300G G424030 – 300 3 150 235 260 B4044KEY200GBRZ – G434020 200 2 – 135 160 B4044KEY300GBRZ – G434030 300 3 150 235 260 B41