Setting - tiger-sat.com

Recommendations

Info

HDMI Mode: Set the HDMI output mode. TV Screen ratio: Set the TV Screen mode. TV Screen Format: Set the display format according to the screen ratio 4.3.7 Other Setting Auto Channel Selection: If you set ON, in the channel list when you highlight the channel, it will play automatically. If you set OFF, in the channel list when you highlight the channel, you should press the OK button to play it. Recall List: If you set ON, when you press the RECALL button, it will display the channel list you watched previous. If you set OFF, when you press the RECALL button, it will directly back to the channel you watched last time. Volume Per Channel: If you set ON, you can set different volume for each channel. If you set OFF, all channels can only have one volume. Change Channel Option: If you select Freeze, when you switch channels, it will display the last frame of the previous channel. If you select Blank, when you switch channels it will display blank screen. DVB info display: If you set ON, it will shows the DVB info 4.3.8 Record Setting Record Driver Setting: You can choose which disk to store data Auto Timeshift: You can set it on or off. it allows you to pause a live broadcast and return to it later and continue where you left off. When you set it off,press the || button to start timeshift. When you set it on, Played a progrom, While it is in timeshift mode automaticly. Press the � button can play the programme, press the ��/�� button can fast rewind or fast forward, press the ■ button to stop timeshift. Live buffer size: This time represents when recording to the set time, it started automatically cover written from scratch file. 4.3.9 About STB In this menu, you can get the information about the STB, such as Model ID, Software version,
Load and Kemel version and so on. When you need service from the dealer you need to submit this information in order to get the correct and fast after sales service. 4.4 Network You can visit the internet through the Ethernet cable or Wi-Fi. 4.4.1 LAN Connect one end of the Ethernet cable to the product and the other end to the LAN router,If the Network is connected, it should get the correct IP address and display “Status: Link Up”. RED:Set ON means you can input the IP address by manual, set OFF means you can only get dynamic IP. 4.4.2 Wireless
Page 1 and 2: � Safety Precaution This STB has
Page 3 and 4: I. Reference 1.1 General Features D
Page 5 and 6: Digital Audio output (Optical). 5.
Page 7 and 8: 31. ��: Fast forward. 32. �:
Page 9 and 10: 1. Satellite: Select the satellite
Page 11 and 12: 4.1.3 Manual search Select the sate
Page 13 and 14: Menu->Setting->Channel Manager->Edi
Page 15 and 16: 1. Press the [�/�] button to ch
Page 17: 4. Reset All Scramble Channels: All
Page 21 and 22: 4.4.6 Samba setting Allow access to
Page 23 and 24: 5.4 FTP Server Menu Menu->Netork Ap
Page 25 and 26: 5.6 Internet Radio You can listen t
Page 27 and 28: OK: View play list or play the high
Page 29 and 30: 6.3 Picture It supports *.jpg, *.pn
Page 31 and 32: Ⅻ.Games Menu->Games->Sub-Attaq/He
Page 33 and 34: 8.5 Event Timer You can set unlimit
Page 35 and 36: Ⅸ.Recording You can watch another
Page 37 and 38: selected language at the bottom of
Page 39 and 40: 10.11 FAV list 1) If you have set s
Page 41 and 42: • Check audio type or soundtrack
Page 43 and 44: � DVB The Digital Video Broadcast

Setting - tiger-sat.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?