TurboCAD V12.3 Pro - Timber Frame Barn - Textual Creations

More documents

Recommendations

Info

Under the Door Materials tab ensure <strong>Frame</strong> is in the Part dropdown menu and then select Paint from theCategory dropdown menu and select Green Gloss from the Material dropdown menu.Select Stop from the Part dropdown menu and then select Paint from the Category dropdown menu andselect Green Gloss from the Material dropdown menu.130
Select Panel from the Part dropdown menu and then select Paint from the Category dropdown menu andselect Green Gloss from the Material dropdown menu. Select Edit Material.Select the Create New Material icon to the right of the current material name field. Enter Forest GreenGloss in the New Material dialogue and click OK.Left mouse click on the color box to open the color menu. Select Forest Green.131
Page 1 and 2: TurboCAD V12.3 Pro - Timber Frame B
Page 3: Table of Contents__________Table of
Page 6 and 7: The Hermes Barn - Main TimbersImage
Page 8 and 9: Sometimes it is best to set the Spa
Page 10 and 11: Materials Application - Session 1A
Page 12 and 13: Press Esc to exit the Rubber Stamp
Page 14 and 15: This embeds the image into the draw
Page 16 and 17: Open the Blocks palette.Left mouse
Page 18 and 19: Press and hold the Shift key down.
Page 20 and 21: Press Esc to deselect the selection
Page 24 and 25: ShinglesThin boxes will now be plac
Page 26 and 27: Left mouse click the yellow folder
Page 28 and 29: Press the Space Bar to exit the too
Page 30: Once just inside, select the Slide

TurboCAD V12.3 Pro - Timber Frame Barn - Textual Creations

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?