Arctic 3G Gateway User Manual - Viola Systems

More documents

Recommendations

Info

CHAPTER 3. QUICK INSTALLATION 15Note: Default username is viola-adm and default password is violam2m. It is recommended that the defaultpassword is changed before the product is connected to a public network.5. Now you should be logged in. White texts on the blue background on the left are the primary navigationtexts and they are always visible on the screen. Individual screens may have their own tabs which split theconfiguration fields on larger screens. See figure 3.2.Figure 3.2: Configuration menu3.4 Configuring Ethernet LAN1. Select Network->Ethernet LAN from the left menu.2. Enter your preferred configuration to the configuration fields.3. Press Submit button on the bottom to save the settings.4. Select Tools->Reboot from the left menu and press Reboot button to restart the unitNote: If you change the IP addresses, your existing web browser connection hangs up after you apply thesettings, so open a new connection to the new IP address (check your Ethernet cabling)5. Now you should be able to connect to the Arctic 3G with your new IP address.3.5 Configuring Mobile WAN (3G)1. Select Network->Mobile WAN (3G) from the left menu.2. Enter your preferred configuration to the configuration fields.3. Press Submit button on the bottom to save the settings.
CHAPTER 3. QUICK INSTALLATION 163.6 Configuring default gateway1. Select Network->WAN Failover from the left menu.2. Set ”WAN Default Route”=”Yes”. This has to be enabled to use either WAN as default route interface.3. If you want to use 3G as default gateway, set ”Primary WAN Interface”=”Mobile WAN (3G)”.4. If you want to use Ethernet WAN as default gateway, set ”Primary WAN Interface”=”Ethernet WAN”.5. If you have both Ethernet WAN and Mobile WAN configured, you can define the Backup WAN Interface.If the primary WAN interface comes down, Arctic 3G automatically switches default route to backup WANinterface. Figure 3.3 shows example configuration where Ethernet WAN is configured as default route.Figure 3.3: Ethernet WAN default route example6. Press Submit button on the bottom to save the settings.7. Select Tools->Reboot from the left menu and press Reboot button to restart the unit.
Page 1 and 2: Arctic 3G Gateway User ManualDocume
Page 3 and 4: CONTENTS 24.3.1 DNS proxy . . . . .
Page 5 and 6: Disclaimer and RevisionsViola Syste
Page 7 and 8: Chapter 1Introduction1.1 About the
Page 9 and 10: CHAPTER 2. HARDWARE DESCRIPTION 82.
Page 11 and 12: CHAPTER 2. HARDWARE DESCRIPTION 102
Page 13 and 14: CHAPTER 2. HARDWARE DESCRIPTION 122
Page 15: Chapter 3Quick InstallationThis cha
Page 19 and 20: CHAPTER 4. NETWORK CONFIGURATION 18
Page 21 and 22: CHAPTER 4. NETWORK CONFIGURATION 20
Page 23 and 24: Chapter 5Serial Port Configuration5
Page 25 and 26: CHAPTER 6. ADDITIONAL SYSTEM CONFIG
Page 27 and 28: Chapter 8Technical SpecificationsPr
Page 29 and 30: Chapter 10Technical SupportContacti

Arctic 3G Gateway User Manual - Viola Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?