Arctic 3G Gateway User Manual - Viola Systems

More documents

Recommendations

Info

Chapter 6Additional System Configuration6.1 Changing system passwordUsername and password can be changed from Tools->User Config screen. It is always recommended to changethe password from the factory default when the Arctic 3G is connected to a public network.Figure 6.1: User config screenNew username and password will be active after the Arctic 3G is restarted.6.2 Date and timeDate and time can be changed from System->Time screen. Date and time can be configured either manuallyentering the time or automatically from connected PC.Figure 6.2: System time configuration screenTo set time manually, enter the time and then press Submit button.To copy time from PC, press Copy PC button and answer “Yes” to question about changing time. Note thatthe PC may not necessarily have correct time set and that needs validation. Also note that the copy functionalityrequires JavaScript support from the browser.6.3 System logSystem log is visible on the Tools->System Log screen. To refresh the system log, use web browser reloadbutton.6.4 Factory default settingsFactory default settings can be applied by restarting the unit pressing down reset button until the LEDs blink.23
CHAPTER 6. ADDITIONAL SYSTEM CONFIGURATION 246.5 Firmware updateCurrent running firmware version can be seen from the System->Status screen.Arctic 3G firmware can be updated from the Tools->Firmware Update screen.Figure 6.3: Firmware update screenNote that firmware update erases all the settings on the unit to the factory defaults. It is recommended tocreate backup from the old configuration before attempting to update the firmware.To update firmware:1. Verify that you have a valid firmware on your PC before you attempt to update the firmware.2. Select Select file button to open file browsing dialog. The actual dialog depends on the used browser.3. Select updated firmware from the file dialog and return to firmware update screen.4. Press Update button to start the firmware update.5. Confirm the update when asked to.Update takes few minutes and the unit will restart with factory default settings when the update is done.
Page 1 and 2: Arctic 3G Gateway User ManualDocume
Page 3 and 4: CONTENTS 24.3.1 DNS proxy . . . . .
Page 5 and 6: Disclaimer and RevisionsViola Syste
Page 7 and 8: Chapter 1Introduction1.1 About the
Page 9 and 10: CHAPTER 2. HARDWARE DESCRIPTION 82.
Page 11 and 12: CHAPTER 2. HARDWARE DESCRIPTION 102
Page 13 and 14: CHAPTER 2. HARDWARE DESCRIPTION 122
Page 15 and 16: Chapter 3Quick InstallationThis cha
Page 17 and 18: CHAPTER 3. QUICK INSTALLATION 163.6
Page 19 and 20: CHAPTER 4. NETWORK CONFIGURATION 18
Page 21 and 22: CHAPTER 4. NETWORK CONFIGURATION 20
Page 23: Chapter 5Serial Port Configuration5
Page 27 and 28: Chapter 8Technical SpecificationsPr
Page 29 and 30: Chapter 10Technical SupportContacti

Arctic 3G Gateway User Manual - Viola Systems

Create successful ePaper yourself

Delete template?

Save as template?