Materials Science and Engineering Laboratory FY 2004 ... - NIST

Polymers Division FY04 Annual Report Publication List
J. Dudowitz, K.F. Freed, and J.F. Douglas,
“Flory–Huggins Model of Equilibrium Polymerization
and Phase Separation in the Stockmayer Fluid,”
Physical Review Letters 92, 045502:1–4 (2004).
A. Indrakanti, R.L. Jones, and S.K. Kumar,
“Do ‘Nonequilibrium’ Effects Control Strong Surface
Segregation from Polymer Blends?” Macromolecules
37, 9–12 (2004).
G. Matsuba, K. Shimizu, H. Wang, Z.G. Wang,
and C.C. Han, “Kinetics of Phase Separation and
Crystallization in Poly(ethylene-ran-hexene) and
Poly(ethylene-ran-octene),” Polymer 44, 7459–7465
(2003).
H. Wang, J.F. Douglas, S.K. Satija, R.J. Composto,
and C.C. Han, “Early-Stage Compositional Segregation
in Polymer Blend Films,” Physical Review E 67,
061801:1–6 (2003).
K. Yurekli, A. Karim, E.J. Amis, and R. Krishnamoorti,
“Phase Behavior of PS-PVME Nanocomposites,”
Macromolecules 37, 507–515 (2004).
Polymer Composites
M.Y. Chiang and M. Fernandez–Garcia, “Relation
of Swelling and Tg Depression to the Apparent Free
Volume of a Particle-Filled Epoxy-Based Adhesive,”
Journal of Applied Polymer Science 87, 1436–1444
(2003).
K.P. Chong and M.Y.M. Chiang, “Research and
Challenges in Applied Mechanics,” in 14th US National
Congress of Theoretical and Applied Mechanics,
June 2002, Blacksburg, VA.
G.A. Holmes, E. Feresenbet, and D. Raghavan,
“Using Self-Assembled Monolayer Technology to Probe
the Mechanical Response of the Fiber Interphase–Matrix
Interphase Interface,” Composite Interfaces 10,
515–546 (2003).
G.A. Holmes, J.H. Kim, C.K. Moon, and
W.G. McDonough, “Coordinated Fracture and Failure
Initiation in Microcomposites,” in ICCE-10, July 2003,
New Orleans, LA.
G.A. Holmes, W.G. McDonough, J.P. Dunkers,
and C.C. Han, “Interaction between Matrix Cracks in
E-Glass/Epoxy Two-Dimensional Multi-Fiber-Array
Model Composites,” Journal of Polymer Science
Part B: Polymer Physics 41, 2976–2981 (2003).
G.A. Holmes, R.C. Peterson, D.L. Hunston, and
W.G. McDonough, “E-Glass/DGEBA/m-PDA Single
Fiber Composites: Interface Debonding During Fiber
Fracture,” Polymer Composites (in press).
48
W.G. McDonough, K.M. Flynn, D.L. Hunston,
and J.P. Dunkers, “A Test Method to Determine the
Fiber and Void Contents of Carbon/Glass Hybrid
Composites,” Journal of ASTM International 1, (2004).
X. Wang, M.Y.M. Chiang, and C.R. Snyder,
“Monte-Carlo Simulation for the Fracture Behavior
of Unidirectional CFRP at Different Temperatures,”
Composites Part A: Applied Science and
Manufacturing (in press).
Polymer Crystallization
D.L. VanderHart, E. Perez, A. Bello, J. Vasquez,
and R. Quijada, “Effect of Tacticity on the Structure
of Poly(1-octadecane),” Polymer (in press).
Characterization and Measurement —
Standards and Data
Polymer Standards
C.M. Guttman and W.R. Blair, “Recertification
of SRM 1483a, a Polyethylene,” NIST SP 260–158
(in press).
C.M. Guttman, W.R. Blair, B.M. Fanconi,
R.J. Goldschmidt, W.E. Wallace, S.J. Wetzel, and
D.L. VanderHart, “Certification of a Polystyrene
Synthetic Polymer, SRM 2888,” NIST SP 260–152
(2003).
J.A. Tesk, “Reference Materials for Tissue
Engineered Medical Products,” in Tissue Engineering
(in press).
J.A. Tesk and L.R. Karam, “NIST and Standards
for Tissue Engineered Medical Products,” in Tissue
Engineered Medical Products, (TEMPS), edited by
E. Schutte, G.L. Picciolo, and D.S. Kaplan (ASTM
International, West Conshohocken, PA 2003).
Mass Spectrometry
B.J. Bauer and K.M. Flynn, “MALDI of Structured
Polymer Particles,” in Proceedings of the 51st ASMS
Conference on Mass Spectrometry and Allied Topics,
June 2003, Montreal, Canada.
B.J. Bauer, K.M. Flynn, and B.D. Vogt, “MALDI
of Layered Polymer Films,” ACS Polymeric Materials:
Science and Engineering Preprints 90, 457–458,
March 2004, Anaheim, CA.