Modification Cardigan - My Label 3D Fashion Pattern Software

More documents

Recommendations

Info

Fabric requirementFabric keyFabric, right Fabric, wrongsidesideSymbols and markings keyCFCBB9Lining, rightsideLining, wrongsideInterfacingCentre FrontCentre BackSheetnumberingReference points – helpin combining theindividual sheetsGrainMarkingpoints onfront sectionsMarking pointson backsectionsPleating indirection ofarrowMarking of dart ends(1cm before the darttip)ButtonmarkingThe figure shows one way of laying out the pattern pieces on a length of folded fabric.Since the pattern pieces are created according to your own measurements andpersonal preferences, they may differ in size and shape from those of the samplearrangement.Fabric, 140cm wide, foldedMaterials and miscellaneousooooTransparent stay tape for holding seams in placeLeather beltOverlockerCoverstitch machine Tip: With the Bernina elasticator (a special serger presser-foot), it’s easy to insertthe stay tape into all the seams.
Cutting outooooooooooo1 x bottom back to fabric fold1 x top back to fabric fold2 x top front2 x bottom front1 x back waistband to fabric fold2 x front waistband2 x front facing2 x sleeve front2 x sleeve back2 x collar to fabric foldRibbon for belt loops, 88 cm x 5cmPreparationArrange pattern pieces on fabric as per the cutting-layout illustration. First cut outpieces, then transfer all markings to the fabric. With open-work (i.e. loosely knit or lacy)knitted fabrics, it may be necessary to use basting thread for marking. Tip: If you don’t have an overlocker or an overlock stitch on your sewing machine,use a narrow, elastic zigzag stitch.Sewing instructionsPreparation:If using open-work knitted fabrics, neaten the pattern pieces beforehand.Belt loopsCut out belt loops in the required length (depending on the belt, approx. 11cm). Neatenlong edges of belt loops with the overlocker. Fold belt loops into thirds so that the longedges overlap and oversew in the centre with the coverstitch machine. Tip:If you don’t have a coverstitch machine, the hems can be sewn with a double needleand your sewing machine.Front:Place the pleats in the bottom-front sections on top of one another as per the markingsand stitch in place. The pleats open towards the side seam. Position belt loops rightsides together near the pleats and pin or baste on.Pin waistband to bottom section as per the markings and sew together.Turn under belt loops and stitch to waistband.
Page 1 and 2: CardiganThis style has:o Front and
Page 3 and 4: BackFirst, mark the centre-back wit
Page 5 and 6: BackCut back section in half at the
Page 7: CollarWiden the collar by hand to 8
Page 11: Folded-back facingWith right sides

Modification Cardigan - My Label 3D Fashion Pattern Software

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?