Series IZS31

Series IZS31Technical Data 1Electricity Removal CharacteristicsNote) Static electricity elimination features are based on the data using the charged plate (size: 150 mm x 150 mm, capacitance: 20 pF) as defined in the U.S. ANSI standards(ANSI/ESD, STM3, 1-2000). Use this as a guideline purpose only for model selection because the value varies depending on the material and/or size of a subject.1) Installation distance and discharge time (Discharge time from 1000 V to 100 V)Air purge: No3025Installation height of sensor: 10 mmDischarge time (sec)20151015Hz5Hz1Hz560Hz30HzWith sensor 1 Hz00 100 200 300 400 500 600Supply pressure: 0.1 MPa (7 l/min (ANR) per nozzle)Installation distance (mm)Air purge: YesSupply pressure: 0.05 MPa (3.5 l/min (ANR) per nozzle)Air purge: YesDischarge time (sec)45403530252015Installation height of sensor: 10 mmWithout sensor 1 HzWithout sensor 60 HzDischarge time (sec)25201510Installation height of sensor: 10 mmWithout sensor 1 Hz/60 Hz105With sensor 1 Hz/60 Hz5With sensor 1 Hz/60 Hz00 500 1000 1500 2000Installation distance (mm)Installation distance (mm)Air purge: Yes Supply pressure: 0.3 MPa (14 l/min (ANR) per nozzle) Air purge: Yes Supply pressure: 0.5 MPa (20 l/min (ANR) per nozzle)Installation height of sensor: 10 mmInstallation height of sensor: 10 mm2015Without sensor 1 Hz/60 HzWithout sensor 1 Hz/60 Hz151010With sensor 1 Hz/60 HzWith sensor 1 Hz/60 Hz550 00 500 1000 1500 2000 0 500 1000 1500 2000Installation distance (mm)Installation distance (mm)Discharge time (sec)00 500 1000 1500 20001055Air purge: Yes Supply pressure: 0.7 MPa (30 l/min (ANR) per nozzle)Installation height of sensor: 10 mm15Discharge time (sec)IZSIZDIZEIZHDischarge time (sec)105With sensor 1 Hz/60 HzWithout sensor 1 Hz/60 Hz00 500 1000 1500 2000Installation distance (mm)