bentrup TC507 - Toma

Appendix DWeekly SwitchingClockThe TC507 is available with weekly switching clock.This optional feature allows you to commenceprogrammes at a preset time or day of week (e.g.commence programme 2 on Monday at 01:00 óclock). You can enter as many switching jobs assegments can be entered (e.g. 20). By over lappingswitching jobs functions for instance automaticreducing temperature at night time become possibleon continuous kilns (heat up kilns weekdays at 7 AMheat up to 1200°C and bring back temperature at 5PM down to 900°C.seg#okvaluetmph.min°C°C/h°F°F/hBy pressing and holding key (7) the TC507 changes tothe mode of entering weekly switching jobs (display(6) shows „cl“ for clock). Display (3) reads the numberof the job. Use the keys (17) and (16) to enter the jobs:prog#seg#oprog#seg#okktimevaluetmptimevaluetmprmprmpdwelldwellh.min°C°C/h°F°F/hh.min°C°C/h°F°F/hPress key time (16) to enter the time (e.g. 23:30). Alltimes are entered in 24h format. To supress the jobenter „off“ instead of a time (to do so press keys (10)and „0“). As on entering programmes the last job mustbe set to „end“.Now press key rmp (17) to select the day of week.Further to the normal weekday selections monday tofriday the TC507 accepts „daily“, „weekday“ and„weekend“. All settings are entered as abbreviation (0-mon, 1-tue, 2-wed, 3-thu, 4-fri, 5-sat, 6-sun, 7-dly,8-w/d, 9-w/e).After pressing key dwell (16) enter the number of theprogramme to be commenced when time is reached.Enter „0“ as programme number to stop a programme.This feature can be used to stop a programme at acertain time or day of week.prog#timermpdwellTo enter next switching job enter key (5); key (4)brings you to the previous job.After 15 seconds not pressing any keys the TC507quits the mode of entering switching jobs and returnsto normal operation. All switching jobs are processedrepeatedly until suppressed on setting them to „off“manually.24