bentrup TC507 - Toma

ContentsGeneral Information.............................................3Entering a Programme ..........................................5Special Notes on Entering Programmes............6ProgrammesSaving Programmes .........................................7Calling up Programmes ...................................8Starting a Programme ...........................................8DisplaysDisplay of setpoint and remaining time ...........9Checking the Current Programme....................9Displaying the Kiln Temperature....................10Locking the Controller........................................12Completion of the Firing Process........................12Manual Process Control.................................13Appendix A: Error Messages of the TC507..........14Appendix B: Data- and Error Log........................17Calling up the Data Log.................................18Calling up the Error Log.................................19Appendix C: Configuration.................................20Explanation of the Parameters ........................21Calling up the Configuration..........................23Appendix D: Weekly Switching Clock ................24Appendix E: Communication Link ......................25Appendix F: Checking Installed Options.............25Appendix G: Electrical Connections ...................26General InformationYour bentrup TC507 is the top model of the bentrupcontroller family TC500. This controller family usesthe latest technology available and incorporates manyfeatures which haven´t been available on kiln controlsbefore. Appearing as a controller easy to use, it is ahighly sophisticated instrument with a totallyconfigurable control design allowing adaption toalmost all applications (for details see Appendix C).Reading through this manual quickly familiarizes youwith the numerous features of the TC507.Please also refer to the safety advise of your kilnmanufacturer. Make sure that the control is placed at aproper distance from the kiln and is not exposed todirect heat or radiation from the kiln.3