CF2000 Instruction Manual - Illumination Technologies

More documents

Recommendations

Info

Illlumination TechnologiesIndexContents CF2000 SeriesPAGE1] Safety………………………………………………………………………………………………………….22] Description.………………………………………………………………………………………………….33] Power ………………………………………………………………………………………………………….44] Mounting and Clearances………………………………………………………………………………….55] Operation…………………………………………………..………………………………………………….65.1] Set up…..………………………………………………………………………………….65.2] Filter installation…..……………………………………………………………………….75.3] Remote Opertaiton (Communication)………………………………………………….85.4] Start up…………………………………………………………………………………….116] Calibration..……………………………………..…………………………………………………………..137] Technical Data7.1] Lamp Performance……………………………………………………………………….157.2] Lamp Life ……………….………………………………………………………………….167.3] Color Filters……….………………………………………………………………………..178] Service and Trouble Shooting……………………………………………..…………………………..189] Specifications.………………………………………………………………..………………………….2010] Accessories and Service Parts……………………………………………………………………….2111] Warranty……………………………………………………………………………………………..…….22AppendixA] Communiction CablesA.2] RS232…………………..………………………………………………………………..23A.2] RS485…………………..………………………………………………………………..23B] Communication ProtocolB.1] ASCII Programming Protocol……………………………………………………….23B.2] Sample ASCII Programs……………………………………………………………….25C] FILTER SPACERSC.1] Use of Filter Spacers………………………………………………………………….281Copyright 2005 ITPN 850-CF2000Illumination Technologies Inc. Rev 3
Safety InstructionsCAUTION:• Read all of these instructions before operating the unit.• Follow all warnings and instructions on this piece of equipment• Failure to use this equipment in the manner specified in this manual may cause the protectionfeatures of the unit to be impaired.1. Retain Instructions - All safety and operatinginstructions should be retained for future reference.2. Follow Instructions - All operating and useinstructions should be followed.3. Water and Moisture - The unit should not be usednear water, or in any area where excessive moisturemay come in contact with the unit.Eau Et Moisissure: Le système ne doit pasêtre utilisé prés de l’eau, ou dans unenvironement où la moisissure pourait venir encontact avec le système.4. Mounting - The unit should be mounted horizontallyon a surface or platform, or vertically via fixture only asrecommended by the manufacturer. Never mountwith fiber receptacle pointing down.5. Ventilation - The unit should be positioned such thatits surroundings do not interfere with its properventilation. Ensure that there is adequate air flowbelow (intake) and in the rear (exhaust) of the unit.6. Heat - The unit produces heat and infrared radiation.Do not place flammable materials on or near the unitat any time. Keep unit away from other sources ofheat. The Lamp housing is marked with a HOTSURFACE CAUTION label to prevent accidentalcontact with it before it cools. Always allow time forthe lamp and all surfaces surrounding the bulb to coolbefore attempting to replace lamp.7. Power Source - The unit should be connected to apower source only of the type described in theoperating instructions and as indicated by the powerentry module.8. Grounding - Precautions should be taken to ensurethat proper grounding of the unit is assured.10. Fuse - DO NOT DEFEAT FUSE. Replace only withfuses as described in the operating manual and asmarked on the unit for the operating voltage that theunit is set for.11. Safety Interrupt - DO NOT MANUALLY DEFEATTHE SAFETY INTERRUPT SWITCH.12. Cleaning - The unit should be externally cleanedusing only standard glass type cleaners.Do not use solvents, cleansers orpetroleum distillates. Disconnect powercord before performing any cleaningoperations.13. Liquid and Object Entry - Care should be taken toavoid objects falling into, or liquids being spilled intothe enclosure through openings.14. Nonuse Periods - Disconnect power cord from outletwhen unit will be left unused for a long period.15. Damage Requiring Service - The unit should beserviced by qualified service personnel if it exhibitsany marked change in performance; if the powercord or enclosure has been damaged; or if objects ormoisture have entered the unit.16. Servicing - The user should not service the unitbeyond that described in this manual.All other servicing should be referred toqualified service personnel. Disconnectpower cord before performing anyservice on the unit.17. DB-25 Interface - The user should refer to theOperations section of thismanual for a completedescription of this connectorand the function of each pin.9. Power Cord - Use only the approved power cordsupplied with the unit, or an equivalent IEC 320 powercord with proper certifications. Power cord should berouted such that it will not be pinched, severed orwalked on.2Copyright 2005 ITPN 850-CF2000Illumination Technologies Inc. Rev 3
Page 4 and 5: LAMPOUTCALIBRATIONCONNECTORCF2000 S
Page 6 and 7: LAMPOUTWHEELHOMEMounting and Cleara
Page 8 and 9: OperationsOperating Position Front
Page 10 and 11: OperationsThe communications board
Page 12 and 13: OperationsThe unit can be set to ru
Page 14 and 15: CalibrationCF2000 SeriesCalibration
Page 16 and 17: Technical DataCF2000 Series7.1 Ligh
Page 18 and 19: Technical Data7.3 Color FiltersTher
Page 20 and 21: Service and TroubleshootingSymptom
Page 22 and 23: CF2000 SeriesSpare Parts/Accessorie
Page 24: AppendixCF2000 SeriesAPPENDIX AA) C
Page 28 and 29: AppendixB.2) SAMPLE PROGRAMSCommand
Page 30 and 31: AppendixMyString = MyString & MyCha

CF2000 Instruction Manual - Illumination Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?