CF2000 Instruction Manual - Illumination Technologies

AppendixCF2000 SeriesAPPENDIX AA) Communication CablesA.1 RS232 communicationIn order to access the unit interface using a standard PC COM port a simple serial cable is needed.Construct a cable per below.A.2 RS485In order to access multiple units a converter and the cables below are need. These cables or correctfor a Patton Electronics converter (285F) If you use another convert the pin to pins may change.You will require one male D-25 connector for every light source in your system. All of the maleconnectors attach to one female.23Copyright 2005 ITPN 850-2000Illumination Technologies Inc. Rev 3