Contents - Peavey.com

This delay creates a stereo delay from a mono source. The range is from 0 to 255 elks if using the MII>T syncfeature and 0 to 724 ms if using a normal delay.LeftInputRight ) ~ ,InputRight OutputParametersTY.The Ty (Type) parameter selects the type of delay desired. Select STEREO, TAPPED, or MONO.The parameters will change depending on the type of delay selected.LD. The LD (Left Delay) parameter selects the amount of delay on the left channel. Range is O-255clkswhen using the MIDI Sync feature or O-724ms using normal delay.RD: The RD (Right Delay) parameter selects the amount of delay on the left channel. Kange is 0-255clkswhen using the MIDI Sync feature or O-724ms when using normal delay.Fb. The Fb (Feedback) parameter selects the amount of delay feedback. Feedback is always takenfrom the longest delay output. Kange is O-99%.TS The TS (Tape Simulator) parameter is used as a low pass filter before the signal is put throughthe feedback circuit. This feature is used to simulate a warmer, more realistic room sound. Rangeis lK, 2K, 4K, 8K, or OFF.A&+: The Mx (Mix) parameter sets the direct/effxt mix. Range is ~fi 100.A-8 Appendix A Individual Effects