Sony RealShot Manager Quick Set Up Guide

18. For this example, we have chosen an SNC-RZ30P camera called Entrance, which we wantto use as an alarm trigger input. The camera has built in activity-detection and relaycontacts which can be used.19. Click once on the new IO box. The available IO ports are shown in the centre area.20. Click once on Activity Detection port, the Activity detection settings are shown in the boxbelow.21. Select the Enable box, to enable the IO pin.22. The Pin must then be assigned to cameras before it can be used. This is done by pressingthe Assign Camera(s) button in the main toolbar. An IO box can be assigned to anycamera or group of cameras.23. The assigned camera is shown in the box on the right hand side. See overview picture onthe next page.© Sony PSE 2004This document is intended for use as a guide only. Information in this document is subject to change without notice.20