ADL300 Elevator Drives for Synchronous ... - Sprecher + Schuh

2.4 Product identificationThe basic technical data of the inverter are included in the product code and data plate.The inverter must be selected according to the rated current of the motor.The rated output current of the drive must be higher than or equal to the rated current of the motor used.The speed of the asynchronous motor depends on the number of pole pairs and frequency (plate and catalog data).If using a motor at speeds above the rated speed, contact the motor manufacturer for any related mechanical problems(bearings, unbalance, etc.). The same applies in case of continuous operation at frequencies of less than approx. 20 Hz(inadequate cooling, unless the motor is provided with forced ventilation).Name of model (code)ADL 300 A 1 040 - K B L - F -4-C-CN1CN1 = R-ADL300-C Regulation card (ADL300B only)CANBus:C = includedRated voltage:2M = 230Vac, single-phase2T = 230Vac,three-phase4 = 400Vca, three-phaseEMI FILTER:F = includedLift application:L = includedBraking unit:X = not includedB = includedKeypad:K = included(1-line x 4-character alphanumerical LED display)Inverter power in kW:040 = 4kW055 = 5,5kW075 = 7,5kW110 = 11kW150 = 15kW185 = 18,5kW220 = 22kW300 = 30kW370 = 37kW450 = 45kW550 = 55kW750 = 75kWMechanical dimensions of the drive:1 = size 12 = size 2ModelA = AdvancedB = BasicInverter, ADL300 series3 = size 34 = size 45 = size 5Data plate Firmware and card revision plateSerial numberDrive modelInput (mains supply, frequency, AC InputCurrent at constant torque)Output (Output voltage, frequency, power,current, overload)Type : ADL300A-1040-KBL -F-4-C S/N: 09012345Inp: 230Vac-480Vac (Fctry set=400) 50/60Hz 3Ph12.5A@400Vac 11A@480VacOut : 0-480Vac 300Hz 3Ph 4kW@400Vac 5 Hp @ 460Vac9A @400V Ovld . 200%-10s 8.10A@460V Ovld.200%-10sFirmware revisionCards revisionFirmware HW release S/N 09012345 Prod.Release D F P R S BU SW . CFG CONF------ A -.E -.C ------ A1PowerRegulationSafetyBraking unitSoftwarerevisionProductconfigurationApprovalsPosition of plates on the driveADL300 • Quick installation guide - Specifications and connection 11