ADAM-5000 Series I/O Module User's Manual

More documents

Recommendations

Info

I/O Module IntroductionADAM-5017 8-channel analog input moduleThe ADAM-5017 is a 16-bit, 8-channel analog differential inputmodule that provides programmable input ranges on all channels.It accepts mill volt inputs (±150mV, ±500mV), voltage inputs (±1V, ±5Vand ±10V) and current input (±20 mA, requires 125 ohms resistor).The module provides data to the host computer in engineering units(mV, V or mA). This module is an extremely cost-effective solutionfor industrial measurement and monitoring applications. Its optoisolatedinputs provide 3,000 V DCof isolation between the analog inputand the module, protecting the module and peripherals from damagedue to high input line voltage. Additionally, the module uses analogmultiplexers with active over- voltage protection. The activeprotection circuitry assures that signal fidelity is maintained evenunder fault conditions that would destroy other multiplexers. Thismodule can withstand an input voltage surge of70 Vp-p with ±15 V supplies.ADAM-5017Figure 4: ADAM-5017 module frontal viewP.8 ADAM-5000 Series I/O Module User’s Manual
Page 1 and 2: ADAM-5000 SeriesI/O ModuleUser's Ma
Page 3 and 4: I/O Module Introduction1. Analog In
Page 5 and 6: Technical specifications of ADAM-50
Page 7: I/O Module IntroductionCalibration
Page 11 and 12: I/O Module IntroductionADAM-5017P 8
Page 13 and 14: I/O Module IntroductionTechnical sp
Page 15 and 16: I/O Module IntroductionApplication
Page 19 and 20: I/O Module IntroductionADAM-5017UH
Page 21 and 22: I/O Module IntroductionFigure 14: L
Page 23 and 24: I/O Module IntroductionADAM-5018 7-
Page 31 and 32: I/O Module Introduction4. Execute t
Page 33 and 34: I/O Module IntroductionCalibration
Page 35 and 36: I/O Module IntroductionCalibration
Page 37 and 38: I/O Module IntroductionAnalog outpu
Page 39 and 40: I/O Module Introduction4. Digital I
Page 43 and 44: I/O Module IntroductionFigure 34: C
Page 53 and 54: I/O Module IntroductionTechnical Sp
Page 55 and 56: I/O Module IntroductionTechnical Sp
Page 59 and 60:
I/O Module IntroductionTechnical sp
Page 61 and 62:
I/O Module IntroductionFigure 51: t
Page 63 and 64:
I/O Module IntroductionAlarm Settin
Page 65 and 66:
I/O Module IntroductionADAM-5080 Co
Page 67 and 68:
I/O Module IntroductionFeatures --
Page 69 and 70:
I/O Module IntroductionGetting the
Page 71 and 72:
TTL/Isolated Input LevelI/O Module
Page 73 and 74:
I/O Module IntroductionADAM-5081 4-
Page 75 and 76:
I/O Module IntroductionFeatures --
Page 77 and 78:
I/O Module IntroductionGetting the
Page 79 and 80:
I/O Module IntroductionTTL/Isolated
Page 81 and 82:
I/O Module Introduction7. Serial Mo
Page 83 and 84:
I/O Module IntroductionPIN MappingP
Page 85 and 86:
I/O Module IntroductionLED Status o
Page 87 and 88:
I/O Module Introduction8. Storage M
show all

ADAM-5000 Series I/O Module User's Manual

Create successful ePaper yourself

Delete template?

Save as template?