Operating manual No. 677-1 USA

More documents

Recommendations

Info

1. IntroductionThe KRONE rotary swather is equipped with all necessary safety devices (protective equipment). Not all potentiallydangerous positions on this implement can be fully secured, as this would be incompatible with full functionalcapability. You will find appropriate danger notification (= warning signs in yellow/black), indicating these residualrisks.We have given the safety instructions in the form of so-called warning pictograms. Below you will find importantinformation on the position of these safety labels and their meaning/explanation!Familiarize yourself with the meaning of the warning signs. The text beside them and theirlocation on the machine, indicate the location of particularly dangerous on the machine.1.1 Position of the safety labels on the machine, containing technical safety information377172456KS-761-006Note:Damaged or missing decals have to be replaced by new ones.The order numbers are indicated on the decals10
1 2939 100-4MAX. 540/minMAX. 200 barOrder No. 939 100-4 (1x)Before starting up, read the operating manualand safety instructions and follow them.Order no. 942 019-1 (1x)Order no. 939 462-0 (1x)The PTO speed may not exceed 540 r.p.m.!3 4Pull the guard bar down intoprotection position beforecarrying out work (fold down).Danger in swather diskoperating area - keep your distance!Order No. 939 574-0 (2x)939 574-0Order No. 939 472-2 (2x)56Do not remain in the slewingrange of the deployment arms.Maintain a safe distance!Order No. 939 469-1 (2x)The pressure accumulator is under pressurefrom gas and oil.Only remove or repair in accordance with thetechnical handbook.Order no. 942 050-0 (2x)only for Swadro 761 electric7Order no. 949 228-0 (1x)Order no. 949 229-0 (1x)11
Page 1 and 2: Operating manual No. 677-1 USARotar
Page 4 and 5: II. List of contentsI. Foreword ...
Page 6 and 7: III. General safety instructionsOpe
Page 12 and 13: 942 339-0942 280-11.2 Positioning o
Page 14 and 15: 2. General preparation for use2.1 S
Page 16 and 17: 2.3.2 Hydraulic/electrical connecti
Page 18 and 19: 2.3.4 Lighting cable connectionEsta
Page 20 and 21: 2.5.3 Securing the tine points when
Page 22 and 23: 3.3 Converting from transport to wo
Page 24 and 25: Swadro 761 mechanic versionRight ha
Page 26 and 27: Swadro 761 mechanic versionOpen con
Page 28 and 29: 4. Basic settingThe basic setting s
Page 30 and 31: 4.3 Setting the working widthSwadro
Page 32 and 33: 4.7 Stabilizers and rotor flotation
Page 34 and 35: Tightening torque M A(Nm) of the gu
Page 36 and 37: The oil must be changed at the give
Page 38 and 39: 7. Accessories• It is essential f
Page 40 and 41: Appendix to the operating manualAss
Page 42: 6. Electrical Circuit Diagram42

Operating manual No. 677-1 USA

Create successful ePaper yourself

Delete template?

Save as template?