Operating manual No. 677-1 USA

2.3.2 Hydraulic/electrical connectionSwadro 651 and Swadro 761 mechanic versionThe double swather requires a single-action hydraulicconnection to the tractor.Each movement function on the machine is preselected atthe hydraulic switch cock.Attach the supplied wallet (1) for the hydraulic switchcock (2) behind the tractor cab. Make sure that thehydraulic hoses are not stretched or pinched duringlifting and sinking.When installing the wallet on the tractor,make sure that the switch cock can bereached by the tractor driver and that thehydraulic hoses (3) are more than 1 mfrom the driver's seat!123KS-0-101• When connecting the hydraulic hosesto the tractor hydraulic system,it should be ensured that the hydraulicsystems both in the tractor and implementare not pressurised!21KS-761-005Swadro 761 electric versionThree snap-on connections are provided for the electricconnection.Previously install the constant currentsocket and the control unit support ontothe tractor (if not yet installed).– Connect the plug of the lighting equipment to therespective socket on the tractor.– Fit the electric control unit to the support on the tractor.– Connect the plug of the supply lead to the constantcurrent socket on the tractorWhen connecting the plugs be sure thatplugs and sockets are clean and dry. Dirtand moisture can cause short circuits.16