Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Appendix to the operating <strong>manual</strong>Assembly instructions (initial assembly)1. Preparations• It is essential that the PTO shaft is switched off for all care, maintenance, repair andassembly work on the rotary swather.• Shut down the engine and remove the ignition key.• Secure tractor and rotary swather against rolling away!2. Changing wheels on the chassisAttach the implement to the tractor, dismount wheels withaxle bolt and mount in outer position.Machine may only be driven in theready for operation condition withwheels in outer position. –Danger of tipping over!KS-0-0293. Installing the swath rubberThe swath rubber is mounted between the swather disks,below the longitudinal frame. The angle rail (5) is mountedon the machine ex-works.Reinforcement (1) (BD 3 x 40 x 540; 4 pieces)Steel bar (2) (Rd 20 x 595)Swath blanket (3)Steel strip (4) (Bd 2 x 30 x 1065; 2 pieces)Angle strip (5)Bolts (M 6 x 25)Washer (6.4 x 18 x 1.6)Self locking nut (NM 6)Bolts (M 10 x 50)Self locking nut (NM 10)Protective sleeve (6) (PVC 40 x 5 x 100; 4 pieces)261534KS-0-096Slide protective sleeve (6) onto reinforcement (1) andinsert in the pockets of the swath blanket (3) with the steelbar (2). Screw the swath blanket onto the angle rail (5) withthe steel strip (4).Screw steel bar (2) between the angle rail and the clip. Justtighten the fixing bolt so that the steel bar can still freelyswing.40
Change language