Operating manual No. 677-1 USA

Swadro 761 mechanic versionOpen control valves (1) and (2).Disengage the lock via the actuating cable and set thetractor hydraulics actuation lever to "Lift". Keep pullingthe actuating cable until the pin on the swather arm hasgone past the engagement point for the working position.Raise the swather arms until the lock has snappedinto the working position.Fold the lateral guard bar outwards.For this purpose: - Pull out the retaining pins- Fold back the bar- Insert retaining pins21KS-761-005Swadro 761 electric versionElectrical operation device• Switch on operation device (0 > 1)• Move switch (6) to the central position• Switch (5) must also be located in the central position!Disengage the lock via the actuating cable and set thetractor hydraulics actuation lever to "Lift". Keep pullingthe actuating cable until the pin on the swather arm hasgone past the engagement point for the working position.Raise the swather arms until the lock has snappedinto the working position.Fold the lateral guard bar outwards.For this purpose: - Pull out the retaining pins- Fold back the bar- Insert retaining pins321MB KKRONE546KS-0-102Before starting any transport journeys,pressurize the deployment arm hydrauliccylinders and then set the tractorhydraulics to "neutral", so that thedeployment arm transport locks are notloaded.939 486-226