code of operations part d nominations, allocations and ... - Gaslink

(c)On a Zero Flow Day a Shipper’s Initial Entry Allocation and a Shipper’sInitial CSEP Exit Allocation shall be calculated as follows:(1) where no Valid Nominations (other than deemed zero Nominations)have been received by the Transporter at the Entry Point and at theCSEP configured within the Bi-Directional CSP all Allocations shallbe zero;(2) where the aggregate of the Nominated Quantities in respect of theEntry Point is equal to the aggregate of the Nominated Quantities atthe CSEP configured within the Bi-Directional CSP the Shipper’sEntry Allocation shall be equal to the Shipper’s Valid EntryNomination or Valid Entry Renomination and the Shipper’s CSEPExit Allocation shall be equal to the Shipper’s Valid CSEP ExitNomination or Valid CSEP Exit Renomination; and(3) in all other circumstances the Shipper’s Initial CSEP Exit Allocationand Shipper’s Initial Entry Allocation shall be calculated as follows:SQ = Q x SNQ/AGG nomwhere:SQ = a Quantity of Natural Gas (expressed inkWh) allocated to an individual Shipperat the Entry Point or the ConnectedSystem Exit Point (as the case may be)on the Day;Q = the lesser of the EODQ or the aggregateof the Nominated Quantities in allValid CSEP Exit Nominations or ValidCSEP Exit Renominations at theConnected System Exit Point on theDay;SNQ = the individual Shipper’s Valid EntryNomination, Valid Entry Renominationor Valid CSEP Exit Nomination orValid CSEP Exit Renomination (as thecase may be) andAGG nom = in the case of calculation of EntryAllocations mean the EODQ and in thecase of calculation of CSEP ExitAllocation the aggregate of allShippers’ Valid CSEP ExitCode of Operations Version 3.061Part D