Trendsetter NEWS SA - Kodak

2 Chapter 1 —SafetyWho Should Use This GuideDangers, Warnings, and CautionsThis guide is intended for anyone who is involved in operating ormaintaining a Trendsetter® NEWS SA output device.To use this guide, you should:• Have a working knowledge of prepress operations• Be familiar with the Windows® operating systemThis guide assumes that:• All the hardware, software, and network components of your Creosystem are installed, configured, and operating correctly.• Files submitted to the Creo system are free of common errors usuallyresolved during preflight, such as missing fonts and PostScript® errors.If you have questions about using the output device, write down the serialnumber for your output device, and contact your authorized servicerepresentative. You can find the serial number on the Identification label,which is located at the rear of the output device (see Identification Label onpage 80).All dangers, warnings, and cautions are meant to provide you with safetyinformation. Disregarding dangers, warnings, and cautions can result inpersonal injury to you or damage to your equipment.DANGER: This symbol indicates an imminently hazardous situation,which, if not avoided, will result in death or serious injury. This does notalert you to a property damage accident unless personal injury risks areassociated with the accident.WARNING: This symbol indicates a potentially hazardous situation, which, if notavoided, could result in death or serious injury. This does not alert you to aproperty damage accident unless personal injury risks are associated with theaccident.CAUTION: This symbol indicates a potentially hazardous situation, which, if notavoided, may result in minor or moderate injury. This may also alert you tounsafe practices or potential property-damage-only accidents.