Trendsetter NEWS SA - Kodak

6 Chapter 1 —SafetyWARNING: When opening access panels, keep hands away from moving partsuntil the rotating drum comes to a complete stop (see Interlock System onpage 5). Mechanical hazards associated with the output device can result inserious injury and/or damage to your output device.If mechanical movements do not stop after five seconds when you open orremove an access panel, the output device must be repaired. Do thefollowing:• Turn off the output device.• Close or replace the access panel. See To close the front and top panels:on page 32.• Contact your authorized service representative as soon as possible.Power SwitchThe power switch disconnects power to the output device.Regular OperationsThe power switch is located on the outside of the device. When you areinstructed to turn off the output device for a maintenance procedure, usethis switch to turn off the power. See Shutting Down the Trendsetter onpage 19.Emergency ShutdownWhen the Emergency Stop switch (see page 7) is not accessible, turn thepower switch to the Off position. The power switch disconnects power tothe device.