Trendsetter NEWS SA - Kodak

Cleaning Exterior Surfaces 29Cleaning RecommendationsBefore cleaning exterior surfaces of the output device, vacuum all accesspanel seams to remove any accumulated dust. It may be sufficient to simplywipe the surfaces clean with dry cloths if it is done frequently and if theenvironment is relatively dry and free of vapor. For a more thoroughcleaning, use cloths dampened with water and a mild detergent.Thoroughly wipe off all detergent residue with a clean, damp cloth.WARNING: Do not let water or other liquids run freely into the output device.This can result in serious injury from electrical shock as well as damage to youroutput device.Removing StainsTo remove stains (such as ink) from exterior surfaces of the output device,immediately wipe the stain with a cloth dampened with water and a milddetergent. Thoroughly wipe off all detergent residue with a clean, dampcloth. If the stains do not come off with mild detergent and water, use asmall amount of isopropyl alcohol to remove the stain.Cleaning the Load RampClean the glass load ramp weekly with a clean cloth and glass cleaner.CAUTION: Do not spray chemical glass cleaner directly on the load ramp, as itcould run into the interior of the output device and cause damage. Dampen acloth with cleaner first, and then wipe the load ramp clean.To clean the glass load ramp:1. Dampen a clean cloth with glass cleaner.2. Gently wipe the load ramp clean, leaving it dry.