Trendsetter NEWS SA - Kodak

16 Chapter 2 —System OverviewPlate DimensionsThe following plate dimensions apply to the Trendsetter NEWS SA. Theymay not apply to plate dimensions you define in other pressroomoperations, for example, putting a plate on a press.PlateWidth = size along drumDrumLength = sizearound drumFigure 5: Plate dimensions—landscape orientationImportant: The output device does not measure the size of plate along thedrum. If the length of the plate (around the drum) is correct, but the width(along the drum) does not correspond with the media size selected in PrintConsole, the output device will either image the plate or report an edge detecterror. This does not damage the output device in any way. However, the outputdevice does not notify you that a plate or plates of an incorrect size have beenimaged.Plate ProcessingSome of the plates supported by the Trendsetter NEWS SA requireprocessing after they are imaged. For information on processing yourplates, see the plate manufacturer’s documentation.