Trendsetter NEWS SA - Kodak

18 Chapter 3 —OperationStarting the TrendsetterWarmup TimeThe Trendsetter NEWS SA output device can take up to two minutes towarm up after it is turned on. You cannot image plates while the outputdevice is warming up. Files submitted for imaging wait on the workstationuntil the output device is ready.To start the output device:1. Turn on the output device.The power switch is located at the top of the power box panel. Turn thepower switch clockwise.If the output device does not start, the circuit breaker may be tripped.To reset the circuit breaker, see Tripped Circuit Breaker on page 73.Power switchOnpositionFigure 6: Turn the power switch to the On position2. Turn on the workstation.For information on turning on the workstation, see thedocumentation you received with your workstation.3. Start Print Console.For details on starting Print Console, see the Print Console Quick StartGuide.