XG-V10XU - diagramas.diagram...

XG-V10XU5. Removing the power/ballast PWB unit assembly.5-1. Remove the lock screw from the socket holder (with shorter lead) for the lamp unit 1. Slide sideway anddetach the holder.5-2. Remove the lock screw from the socket holder (with longer lead) for the lamp unit 2. Slide sideway and detachthe holder.5-3. Disconnect the connectors from the power/ballast PWB unit assembly.5-4. Remove the six lock screws from the power/ballast PWB unit assembly. Lift and detach this assembly.6. Removing the inlet PWB unit assembly.6-1. Remove the three lock screws from the left-side panel at the inlet PWB unit assembly.6-2. Disconnect the connectors from the inlet PWB unit assembly.6-3. Remove the two lock screws from the bottom panel at the inlet PWB unit assembly. Lift and detach thisassembly.7. Removing the optical mechanism unit.7-1. Remove the five lock screws from the lamp fan assembly.7-2. Remove the seven lock screwsfrom the optical mechanism unit.Lift and detach this unit.5-35-4Power/ballast PWBunit assembly5-1(BB)(EA)(PL)(F7)5-35-2(F6)7-27-1Lamp fan assembly7-17-1Optical mechanism unitLeft-side panelBottom panel(EC)6-26-1(PA)Inlet PWB unit assembly6-320