XG-V10XU - diagramas.diagram...

XG-V10XUPrecautions in servicing(1) If the convergence gets out of spec during servicing, call up the process mode and select the following subjects.GroupSubject: NOKO: R-CNV-H, R-CNV-VG-CNV-H, G-CNV-VB-CNV-H, B-CNV-V(H: Horizontal adjustment, V: Vertical adjustment)Adjust the above settings in the range of 0-4. When changing each setting from the initial setting of 2, however,the 1024 x 768 dot display area will have a fewer number of lines.Example 1 : When the R-CNV-H setting is changed from 2 (initial) to 4, the number of lines will be from 1024 to1022.Example 2 : When the R-CNV-H, G-CNV-H and B-CNV-H settings are changed to 3, 3 and 4, respectively, thedisplay will be 1024x 768lines. But when the above settings are switched to 2, 2 and 3, respectively,the display will be 1023 x 768 lines.Preferably keep each setting as close to 2 as possible.(2) When calling up the process mode, make sure the following appears onscreen.Group : VIDEO1Subject : SET UP B 2SET UP C 1Be sure to exit from this mode with the following onscreen.Subject : SET UP 140