Smart Programmer - UK

More documents

Recommendations

Info

SEKOSMART- Programmer- Laundry system1Contents of thepackage2Presentation3INItialize theprogrammer4Entering theparameters5Programming6Programmingthe Memory Card• Sending data tothe MemoryCard• Receiving thedata in theprogrammer• PaSsWord• Consumptionstatistics• Troubleshootingguide7Examples ofprogramming8Switching theprogrammer onand off9Connecting theprogrammer to aPC or to theConsole6.4 Consumption statisticsFrom the Communications menu, select ”STA” or press [4]; the following message will appear on thedisplay:6.4.1 Initialize the statistics functionSTAtisticsVIS INIWith this command, when a new starting date for the calculations is entered, all the values referred tothe statistics will be reset.• From the Communications menu select “INI” or press [2]; the following message will appear onthe display:Statistic INIt.Date 00/00/00• Enter the current date (dd/mm/yy) then press [Enter] repeatedly until the following messageappears:Init. 00/00/00No Yes• To initialise the statistics function select “Yes” or press [2];• If you do not wish to initialise the function, press ESC or select “No” or press [1].Comunic. ErrorIf the display indicates see point 6.56.4.2 Viewing the statisticsThis command can be used to view the number of cycles carried out for each program, and the time forwhich each single pump was running:• From the Communications menu select: “STA” then “VIS”; the following message will appearon the display:Visual. 00/00/00Prg 01 0000• The following will be shown, in this order: the date on which the count started (dd/mm/yy), theprogram number and the number of times it has been run.• On pressing [4] , all the programs will be shown and then the following message will appearon the display:Visual. 00/00/00Pmp 1 0000:00:00• The data shown are, in order, the starting date of the count (dd/mm/yy), the pump number andits total running time.• Press [4] to view all the pumps, one after the other.• Press [ESC] repeatedly to return to the Main Menu.Smart programmer Version 3.0 Code n° 0000136346 20
SEKOSMART- Programmer- Laundry system1Contents of thepackage2Presentation3INItialize theprogrammer6.5 Trouble-shooting guideComunic. Error1) If the display indicates make sure that:• The control console is in the PROGRAM SELECTION mode;• The Memory Card has been inserted into the programmer correctly;Wrong Memory2) If the display indicates during transmission, make sure that:4Entering theparameters5Programming6Programmingthe Memory Card• Sending data tothe MemoryCard• Receiving thedata in theprogrammer• PaSsWord• Consumptionstatistics• Troubleshootingguide• The Memory Card that has been inserted is not the Language Memory Card.Wrong Memory3) If the display indicates while choosing a language, make sure that:• The Memory Card that has been inserted is the Language Memory Card.If the error message persists, contact Seko Italia S.p.A.7Examples ofprogramming8Switching theprogrammer onand off9Connecting theprogrammer to aPC or to theConsoleSmart programmer Version 3.0 Code n° 0000136346 21
Page 2 and 3: SEKOSMART- Programmer- Laundry syst
Page 8 and 9: 1Contents of thepackage2Presentatio
Page 10 and 11: 1Contents of thepackage2Presentatio
Page 24: SEKOSMART- Programmer- Laundry syst

Smart Programmer - UK

Create successful ePaper yourself

Delete template?

Save as template?