Smart Programmer - UK

More documents

Recommendations

Info

SEKOSMART- Programmer- Laundry system1Contents of thepackage2Presentation3INItialize theprogrammer• Reset• Setting thelanguage• Setting theAuto-washmode• Setting thework area4Entering theparameters3.3.2 Autowash-2• From the autowash menu, select ”2” or press [2]; the following message will appear on thedisplay:INItializeRST LAN AUW WAR• The programs follow the pre-defined pattern indicated below:Signal 3 Signal 4 Signal 5 Program Start(IN3) (IN4) (IN5)1 2 4Active Not Active Not Active 1Not Active Active Not Active 2Active Active Not Active 3Not Active Not Active Active 4Active Not Active Active 5Not Active Active Active 6Active Active Active 75Programming6Programming theMemory Card7Examples ofprogramming8Switching theprogrammer onand off9Connecting theprogrammer to aPC or to theConsole3.3.3 Autowash-3• From the autowash menu, select ”3” or press [3]; the following message will appear on thedisplay:INItializeRST LAN AUW WAR• The programs follow the pre-defined pattern indicated below:Signal 2 Signal 3 Signal 4(IN2)(IN3) (IN4)Program start1 2 4Active Not Active Not Active 1Not Active Active Not Active 2Active Active Not Active 3Not Active Not Active Active 4Active Not Active Active 5Not Active Active Active 6Active Active Active 7Smart programmer Version 3.0 Code n° 0000136346 6
SEKOSMART- Programmer- Laundry system1Contents of thepackage2Presentation3.3.4 Autowash-4With this type of approach, it is possible to associate via the software the input signals with the programintended to be automatically activated.• From the autowash menu, select ”4” or press [4]; the following message will appear on thedisplay:Autowash Prg: 013INItialize theprogrammer• Reset• Setting thelanguage• Setting theAutowashmode• Setting thework area4Entering theparameters5Programming6Programming theMemory Card7Examples ofprogramming8Switching theprogrammer onand off9Connecting theprogrammer to aPC or to theConsole• Set the program number then press the [Enter] key; the following message will appear on thedisplay:Autowash Prg: 011 2 3 4 5 6 OK• Select the signals with which activate the chosen program moving the arrow on the signalnumber then press the [Enter] key to confirm the input that has been selected or press thesignal chosen using the programmer keyboard (the < sign will appear on the display next to theinput that was selected). To exit press [ESC]; to confirm the settings made and store themselect OK then press the [Enter] key.It is possible to enable/disable an input by pressing the key corresponding to the appropriatenumber:key 1: enables or disables input 1; the display will indicate 1
Page 2 and 3: SEKOSMART- Programmer- Laundry syst
Page 8 and 9: 1Contents of thepackage2Presentatio
Page 10 and 11: 1Contents of thepackage2Presentatio
Page 24: SEKOSMART- Programmer- Laundry syst

Smart Programmer - UK

Create successful ePaper yourself

Delete template?

Save as template?