System pro M compact® - Piti Group

System Technical featuresDDA 200pro M compact ® RCD-blocks DDA 200 series3ElectricalfeaturesTECHNICAL FEATURESStandardsOperating characteristic: typePolesRated sensitivity InSizeRated voltage U NInsulation voltage UiMax. operating voltage of circuit testMin. operating voltage of circuit testRated frequencyRated breaking capacity (Icn) acc. to IEC /EN 61009Rated breaking capacity (Icn) acc. to IEC/EN 60947-2Rated residual breaking capacity ImRated impulse withstand voltage (1.2/50) UimpDielectric test voltage at ind. freq. for 1 min.Surge current resistance (wave 8/20)AAVVVVHzAAkAkVkVAMechanicalfeaturesToggleElectrical lifeMechanical lifeProtection degreehousingterminalsTropicalization humid heat °C/RHacc. to IEC /EN 60068-2 constant climatic conditions °C/RHvariable climatic conditions°C/RHAmbient temperature (with daily average +35 °C) °CStorage temperature °CInstallation Terminal type 2P3P/4P In = 25 and 40 A3P/4P In = 63 ATerminal size for cables 2P mm 23P/4P In = 25 and 40 A mm 23P/4P In = 63 A mm 2Tightening torque 2P N*m3P/4P In = 25 and 40 AN*m3P/4P In = 63 AN*mMountingDimensions Dimensions (H x D x W) 2P mmand weight 3P/4P In = 25 and 40 A mm3P/4P In = 63 AmmWeight 2P g3P/4P In = 25 and 40 Ag3P/4P In = 63 AgCombination Combinable with: S 200with MCBsS 200 MS 200 P prior to connection of aluminium conductors ( 4 mm 2 ) ensure that their contact points are cleaned, brushed and coated with grease3/20 ABB