System pro M compact® - Piti Group

Systempro M compact ®Technical detailsATT-ToolCommanddevicesATT-TOOLATT-Tool configuration and programming software allows users to fully customise GSM ATT telephonemodule to their specific requirements. ATT-Tool has a simple and intuitive interface that allows ATTto be quickly configured without having to remember complicated programming strings or consulta manual to learn the programming syntax. ATT-Tool, available in all the main languages, makes itpossible to:- Add/remove up to 250 users authorised for complete or conditional use of ATT module.- Add/remove up to 100 recipients of call rings, sms messages, faxes or emails.- Configure the analog or digital activation mode of the inputs.- Configure the activation mode of the outputs.- Define actions to be performed at pre-established intervals.- Remotely track users and events.- Customise commands and alerts.- Perform program debugging.ATT programmingThe following steps describe how to program the device for receiving alarm notifications and remotelycontrolling loads via mobile phone.ToolbarMenu treeWork areaA B C10Status bar1. Preparing the device- Insert the SIM inside ATT, positioning it as described in the manual.- Connect ATT to the serial port of the PC using the cable supplied in the box.- Insert the battery inside ATT (alternatively, connect the device to a power supply).- Check the connection to the GSM network (fast constant blinking of “GSM Network” LED ).- Install ATT-Tool on the PC from the CD supplied in the box.- Start ATT-Tool software.- Right click with the mouse to select ATT model being used (A).- Right click wtih the mouse to select the language (B).- Right click with the mouse to select the serial port being used (C).Selection tables ............................. pag. 6/73ABB10/135