System pro M compact® - Piti Group

Systempro M compact ®Selection tablesMeasurement devicesFront panel digital instrumentsTechnical featuresPower supply voltage [V] 230 a.c. (for all versions)Test voltage [V] 2000 rms (50 Hz/1 min)Max. signal inputMeasuring rangePrecision classVLM-D1 600 V a.c.; VLM-D2 600 V d.c.AMT-D1 5 A; AMT-D2 60 mVVLM-D1 and VLM-D2 600 V a.c./d.c.AMT-D1 and AMT-D2 from 15 A to 999 A(15-25-40-60-99.9-150-250-400-600-999 A)0.5 (± 1 digit)Operating temperature [°c] -10...+55 (±0.C6%)Storage temperature [°c] -40...+70Average and max. relativehumidity (DIN 40040) 65% (yearly average)85% (+35 °C/60 days a year)Vibration resistance UEC 50-1) [G] (9.81 m/s) 0.3-5 (0.35-3 mnv’5-60 Hz: 3 axes/6 h)Degree of protectionIP52 indoorsIP00 on the terminals (IEC 144, DIN 40050) can beraised to IP40 with suitable terminal coversMaterials- cases and front edge self-extinguishing thermosetting material fungus andtermite resistance according to UL94 V-0- indicators red LED. H 24 mm- terminals brass cable clamps for 72 mm x 72 mm devices/Faston 6.35 mm x 0.8 mm for 96 mm x 96 mm devicesAssemblyvertical/horizontal with special screw-on brackets Dimensions W x H x D (DIN 43700/43716) [mm] 72 x 36 x 8696 x 48 x 8672 x 72 x 5396 x 96 x 53Applicable standards IEC EN 61010-1 Tropicalization allows the instruments to withstand up to 95% relative humidity max {+35 °C/30 days a year) and 75% averagerelative humidity. When the LEDs read “EEE*, this means that the end of the scale has been reached. With 0.5 mm-19 mm thick panels, the screws must be attached in the fixing position nearest to the front edge of the measuringdevice, whereas the 20 mm-39 mm thick panels require the screws to be fixed in the position furthest away from thefront edge.8Wiring diagramsAmmeter and Voltmeter alternating connectionDouble Ammeter and Voltmeter alternating connectionInputPower supplysignal220 V ˜1 2 3 4Inputsignal1 25 6Power supply220 V ˜34S1S2220 V ˜S1S2220 V ˜L1P1P2L1P1P2NNABB 8/23