Summerville Ft.pdf - Swing-N-Slide

Assembly InstructionsFig. 37 Fig. 38Make Each 2'' x 4''A-Frame SupportBOTTOM Flush WithCorrespondingUpright TOP.(2)1-1/2'' deck screwsper joint(10) 1'' x 6'' x 47-1/2'' Roof Slats(2) 1'' x 6'' x 40-1/4'' Roof Slats(3)2-1/2'' Screwsper jointFig. 39aFig. 39(1)1-1/4'' deck screwper joint,(8) per board.1'' x 4'' x 44-3/4''1/2''Note: Place screws sothey go through thethickest area of theroof slat board.(2) 1'' x 4'' x 44-3/4''Install Wood Roof.1. Install Wood Roof Assembly on unit as shown in(Fig. 37).NOTE: Make certain A-Frame 2'' x 4'' supportbottoms are flush with corresponding uprighttops and roof is level.2. Attach remaining roof slats as shown in (Fig. 38).3. Attach two (2) Roof Slat Support Boards evenlyspaced underneath the wood roof as shown in(Fig. 39). Make certain to place screws throughthickest portion of Roof Slats (near the bottom seam)as shown in (Fig. 39a).1-1/4'' screw1-1/2'' screw2-1/2'' screw36