Summerville Ft.pdf - Swing-N-Slide

Assembly InstructionsIntroducing patent pending TIMBER-GLOVE:A unique and innovative lumber wrap providing padded, splinter free uprights for residential play sets.Offered exclusively in our premium stained NO-Cut play sets.Please Note: Your unit includes Plastic Incapsulated Uprights. The TIMBER-GLOVE lumber wrapsare not a required element for the assembly of this play set. They are provided in this kit as an option, as they aredesigned to provide aesthetic properties only.DO NOT USE TIMBERGLOVE ON SWING BEAM• 900 Denier Ballistic Polyester: UV protected exterior fabric covers cosmetic lumber imperfections and providesfor splinter free uprights.• TIMBER-GLOVE provides complimentary color for treated 4x4 lumber and enhances the appearance ofcompleted premium stained lumber play set.• 7 TIMBER-GLOVE lumber wraps are included in each premium NO-Cut kit, and feature easy to attach hookand loop fasteners allowing for fluctuating lumber dimensions.WARNING: Failure to properly install and maintain screw attachment on TimberGlove lumber wraps could create acondition that might result in serious injury.A1-1/4'' screws(1 every 12'')APPLYING TIMBERGLOVE TOUPRIGHTS1. Select four (4) 4'' x 4'' x 96''boards to be used as uprights. Laythe 4'' x 4'' boards on the ground.Wrap all four (4) boards with theappropriate length TimberGlovesections as shown in (Fig. A). Makecertain that material is pulled as snugas possible and is fully securedbefore proceeding.2. Secure each TimberGlove in place byplacing one (1) 1-1/4'' screw every12’’ along the seam of the materialas shown in (Fig. A).3. When measuring for bracketlocations, use the Tailor Chalk(included) to mark the desiredbracket locations as shown in(Fig. B).B12''12''Tailor’s Chalk9