Summerville Ft.pdf - Swing-N-Slide

Assembly InstructionsFig. 41Fig. 41a(2)2-1/2'' screwsper joint2-1/2'' screwClimbing Rock InstallationUnder Deck View1. Slide Rock Wall into place as shown in (Fig. 41).2. Press the top 5/4'' x 4'' board up tight against the Cup Bracket to fit the Rock Wall snug against the bottomof the tower deck supports.3. Using (2) 2-1/2’’ screws per side, secure the Rock Wall in place, making certain hardware passes throughthe 2'' x 4'' Supports and into the 4'' x 4'' upright as shown in (Fig. 41a).Note: There must be a nominal 9-1/4’’ Gap between the bottom of the Rock Wall and the top of the underdeck railing.38